Read Sharp MX-LC13 (serv.man15) Technical Bulletin online
MX-7500N MX-LC13 (LARGE CAPACITY TRAYS) 9 – 4
C. Connect the cable
1) Remove the cover of LCT.
2) Cut the rear cabinet with using nipper or cutter to make a hole,
and then wire the harness through the hole.
3) Connect the harness inside the large capacity trays, tighten
the screw(RB14 Packed Item No.13), and pass the harness
through the clamp.
through the clamp.
4)
Fix the cover with the screw.
5)
Connect the connector from LCT to the paper pass unit and
tighten the screw.
tighten the screw.
D. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
E. Size setting
1)
Check to insure that the main body is standby state, and press
the [System setting] key on the operation panel.
the [System setting] key on the operation panel.
2)
Menu screen is displayed on the touch panel. Select the
[Paper Tray Settings].
[Paper Tray Settings].
3)
Select the paper size of large capacity tray from contents of
[Paper Tray Settings].
[Paper Tray Settings].
Click on the first or last page to see other MX-LC13 (serv.man15) service manuals if exist.