MX-FX11 (serv.man2). Image Send Error Code List - Sharp Copying Equipment Service Manual (repair manual). Page 3

75 

NG75 XXXX *

1 

 

•  Reservation cannot be made due to machine busy. (Reservation of PC-FAX cannot be accepted.) 
•  When "PC-FAX or PC-internet FAX send inhibit" is set on the machine side. 

76 

NG76 XXXX *

1 

 

Reserved with receive confirmation request in PC-Internet FAX, but the Internet FAX sender is not registered 

on the machine side. <Send> 

77 

NG77 XXXX *

1 

 

In reserving specified filing in PC-FAX or PC-Internet FAX, the machine has no filing function. 

78 

NG78 XXXX *

1 

 

The filing function is inhibited on the machine side when filing specification is reserved by PC-FAX or PC-

Internet FAX. 

79 

NG79 XXXX *

1 

 

An authentication error occurs when PC-FAX or PC-Internet FAX is reserved. 

80 

NG80 XXXX *

1 

 

NIC connect failure (network abnormality) 

•  Check for disconnection of cables. 
•  A network trouble (CE-XX) occurs. 
•  The port is set to DISABLE. 
•  Authentication of the POP server is failed when POP before SMTP is enabled. 
•  When an error other than the communication result code 93 or 94 in D-SMTP send (including error 

response of 5XX) 

81 

NG REPORT 

In Internet FAX send, reply of receive confirmation of the remote machine is not normal. (Including PC-Internet 
FAX). 

•  Error of the disposition-modifier. 
•  The disposition modifier is not in an error, and the disposition type is other than displayed, dispatched, or 

processed. 

82 

NO REPORT 

In Internet FAX send, time-out occurs in waiting for receive confirmation from the remote machine. (Including 

PC-Internet FAX). 

•  In a case where send confirmation wait time-out time is other than 0, when send confirmation reply from an 

Internet FAX destination is not received. 

•  Recalls of the set number of recalls are performed, but send confirmation reply from an intemet AFX 

destination is not received. 

83 

NG LIMIT 

In E-mail/FTP, Internet FAX send, the send data size exceeds the upper limit of send data. 

84 

REJECTED 

In e-mail receive, a sender is registered in receive reject address/domain. <Receive> 

85 

NG85 XXXX *

1 

 

In e-mail receive, an error occurs in communication with POP3 server. 

•  Header acquisition error. 
•  Time-out during mail receive 

86 

RECEIVED 

In e-mail receive, an unsupported attached file is received. 

Only the TIFF-F type is supported for attached files. 
•  The TIFF-F type of the attached file cannot be recognized. 
•  There is no attached file. 

87 

NG87 XXXX *

1 

 

In e-mail receive, an attached file cannot be stored in memory. 

•  Memory over 

88 

NG88 XXXX *

1 

 

In SMTP e-mail receive, an attached file cannot be stored in memory. 

•  Cannot be stored in memory. 
•  The number of items of acting receive data is the maximum, and an additional data cannot be stored. 

89 

NG89 XXXX *

1 

 

In SMTP e-mail receive, an error occurs in communication with the mail server. 

•  Time-out occurs during e-mail receive. 

90 

NG90 XXXX *

1 

 

After reservation by re-operation of document filing, conversion for image send cannot be made. 

91 

NG91 XXXX *

1 

 *

2 

 

Data cannot be written to the memory device when Scan To USB is executed. 

•  The memory device is disconnected during writing to the memory device. 
•  An error occurs due to a memory device trouble. 

92 

NG92 XXXX *

1 

 *

2 

 

The USB device memory overflows during writing data into the memory device when "Scan to USB" is 
executed. 

93 

NG93 XXXX *

1 

 

When error in D-SMTP send (with recall) 
•  An error response of 4XX occurs during communication with the SMTP server. 
•  Time out occurs after establishment of connection with the SMTP server. 

94 

NG94 XXXX *

1 

 

When busy in D-SMTP send 
Time out occurs during establishment of connection with the SMTP server. 

95 

NG95 XXXX *

1 

 

When the path is too long in execution of Scan To USB. 

96 

NG96 XXXX *

1 

 

When the normal process is not executed in the secure mail sending. 

98 

NG98 XXXX *

1 

 

The copy inhibit pattern is detected when scanning a document. 

99 

NG99 XXXX *

1 

 

A document which is inhibited to be copied such as a banknote is scanned. 

*1: For a job status result in "Display in the column of result," "NG A  XXXX" is displayed. "AA" is the code number. 

For a communication result, "Communication error 

A A (XXXX)" 

is displayed. 

*2: The error code of Scan To USB is specified only in the job log. 
• When the communication result is OK, the communication sub code 1 and the communication sub code 2 are "0000." 
•  Errors in ( ) are not used. 

MX-FX11 TROUBLE CODE 3 — 3