Read Sharp MX-FRX2U (serv.man3) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-347
15
Coala printing issue
16
Cannot enable
inbound routing
(CCJU-6)
inbound routing
(CCJU-6)
Administration
Settings link is
missing in imager
webpage (CSCJ-2)
Settings link is
missing in imager
webpage (CSCJ-2)
Since determining whether to display each setting item of WEB Page was not conducted
correctly, "Administration Settings" of “Inbound Routing Setting” might not be displayed.
Modification has been implemented to determine correctly whether to display each
setting item of WEB Page.
correctly, "Administration Settings" of “Inbound Routing Setting” might not be displayed.
Modification has been implemented to determine correctly whether to display each
setting item of WEB Page.
17
Expanded the
adjustable range of
Manual Exposure
Adjustment to lower
part of density
adjustable range of
Manual Exposure
Adjustment to lower
part of density
The amount of correction for manual 1 was insufficient compared to the amount of
correction for possible Suppress Background when conducting AE copy in B/W.
correction for possible Suppress Background when conducting AE copy in B/W.
Modification has been implemented with expanding the amount of correction for
Suppress Background to manual 1.
Suppress Background to manual 1.
18
Specification change
of the Hold Setting for
a 1 minute of FAX
Auto Clear
of the Hold Setting for
a 1 minute of FAX
Auto Clear
When the checkbox of [Hold Setting for a While after Scanning Has Been Completed] is
ON in the Default Display Settings of the System Settings, contents of the settings can be
maintained for the certain time.
ON in the Default Display Settings of the System Settings, contents of the settings can be
maintained for the certain time.
Receiving the report that the fax original was delivered not only the desired destination
but also to the previous destination too when sending the fax original to another
destination within 60seconds after the previous FAX sending, the specification was
reviewed. Then the modification has been implemented not to memorise the destinations
even if the checkbox is ON.
but also to the previous destination too when sending the fax original to another
destination within 60seconds after the previous FAX sending, the specification was
reviewed. Then the modification has been implemented not to memorise the destinations
even if the checkbox is ON.
19
Correction of the
problem that the
machine hang up just
after FAX sending
was conducted after
283 days under the
condition of running
24 hours
problem that the
machine hang up just
after FAX sending
was conducted after
283 days under the
condition of running
24 hours
If the operation of FAX sending was conducted after 283 days or more since 1W Energy-
Saving Mode had been OFF and the machine was not powered off with connected to the
network, there were some cases where the key input was not available any more, and
FAX sending could not be done.
Saving Mode had been OFF and the machine was not powered off with connected to the
network, there were some cases where the key input was not available any more, and
FAX sending could not be done.
Please note that receiving the fax and printing from the printer was possible even if this
phenomenon occurred.
phenomenon occurred.
20
Addition of printer
controller initialisation
Sim (Sim67-17)
controller initialisation
Sim (Sim67-17)
Printer controller initialisation Sim (Sim67-17) has been added to cope with the necessity
of printer NVRAM area initialisation in market.
of printer NVRAM area initialisation in market.
