Read Sharp MX-FNX6 Service Manual online
MX-FNX6 REPLACEMENT AND ADJUSTMENT 4 – 4
7. Shift tray paper exit sensor, proof tray
paper surface sensor replacement
1)
Remove the rear cover, the upper cover, and the front door.
2)
Remove the inner cover. (2 screws)
3)
Remove the spring. (Snap fit, 1 position)
4)
Remove the paper exit guide plate. (Connector 1 position,
C-ring 1 position)
C-ring 1 position)
5)
Remove the paper exit sensor from the paper exit guide plate.
6)
Remove the guide plate.
7)
Remove the paper surface sensor bracket from the guide
plate. (1 screw)
plate. (1 screw)
8)
Remove the proof tray paper surface sensor from the bracket.
8. Finisher inlet sensor replacement
1)
Remove the finisher inlet sensor bracket. (1 screw)
2)
Remove the finisher inlet sensor from the bracket.
Inner cover
Connector
Shift tray paper exit sensor
Spring
Snap fit
Paper exit
guide plate
guide plate
C-ring
Proof tray paper surface sensor
Paper surface sensor bracket
Guide plate
Finisher inlet sensor bracket
Finisher inlet sensor bracket
Click on the first or last page to see other MX-FNX6 service manuals if exist.