Read Sharp MX-FNX5 Service Manual online
MX-FNX5 REPLACEMENT AND ADJUSTMENT 3 – 3
3. JOGGER FENCE
1)
Open the front door.
2)
Pull out the jogger and stapler unit.
3)
Push both fences to the center.
4)
Remove the left jogger fence [A] ( x 1)
5)
Remove the right jogger fence [B] ( x 1).
NOTE:
If the screws are difficult to remove or re-attach, remove the
jogger fence belt and spring plate.
NOTE:
If the screws are difficult to remove or re-attach, remove the
jogger fence belt and spring plate.
4. SENSORS
A. PAPER HEIGHT SENSORS
Remove:
• Top cover. (
• Top cover. (
1. COVERS -D.)
• Left upper panel and left upper cover ( x 2,
x 2)
(
1. COVERS -C.)
[A] Protector plate ( x 1).
[B] Feeler ( x 1).
[C] Sensor bracket ( x 1).
[D] Paper height sensor - staple mode (
[B] Feeler ( x 1).
[C] Sensor bracket ( x 1).
[D] Paper height sensor - staple mode (
x 1, Pawls x4)
[E] Paper height sensor - standby mode (
x 1, Pawls x4)
[F] Paper height sensor - shift/Z-Fold(
x 1, Pawls x4).
B. EXIT GUIDE HP SENSOR
1)
Remove the top cover. (
1. COVERS -D.)
2)
Remove the left upper panel and left upper cover
( x 2,
( x 2,
x 2).
Remove:
[A] Sensor bracket [A] ( x 1).
[A] Sensor bracket [A] ( x 1).
[F]
[G]
[H]
[I]
[B]
[A]
[C]
[B]
[A]
[D]
[E]
[F]
[A]
Click on the first or last page to see other MX-FNX5 service manuals if exist.