Read Sharp MX-FNX10 (serv.man38) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-621
6. To cope with the "F1-08" trouble and saddle folding location correction, we have issued a
special ROM.
This special ROM is exclusively used for the field.
Version
01b01.02
Reason to change: In order to correct an error described below.
1. If the gripper opening is insufficient, the stapler may collide with the U-shaped plate in lateral
motion to cause the "F1-08" trouble. Insufficient gripper opening is caused when a mechanical
part rattles in the driving section.
part rattles in the driving section.
(This ROM is applicable to S/N 8L002667 and earlier but there is no problem if it is applied to
products after S/N 8L002667.)
Note) If a stapler phase deviation occurs in the "F1-08" trouble, check the gripper phase deviation
of the accompanying sheet and the Change Guidelines.
2. The folding location may shift, depending on the number of sheets to be bound.
3. Action:
1, 2: From middle of August 2008 production
3: From middle of September 2008 production
4,5: From middle of October 2008 production
4,5: From middle of October 2008 production
Click on the first or last page to see other MX-FNX10 (serv.man38) service manuals if exist.