MX-FN26. Service Manual for FN26N. - Sharp Copying Equipment Service Manual (repair manual). Page 9

MX-FN26 N  ADJUSTMENTS  4 – 1

Perform an adjustments when a problem occurs.

If the adjustment value is changed when there is no trouble in the
machine, a trouble may be generated such as improper alignment
of paper, paper exit jam, attachment of roller marks on paper, etc.

 

This adjustment is executed when a trouble occurs in paper align-
ment. 

1)

Execute Sim3-10.

2)

Select "1: FPAM ADJUST".

3)

Enter the set value with 10-key. (Press [C] key to clear the
entered values.)

Initial value: 50

When the adjustment value is increased by 1, the alignment
plate F/R width is narrowed by 0.419mm in alignment opera-
tion.

When the adjustment value is decreased by 1, the alignment
plate F/R width is widened by 0.419mm in alignment operation.

The alignment plate F and the alignment plate R cannot be
adjusted separately. The shift amount on the F side and that
on the R side are alternatively corrected everytime the adjust-
ment value is increased by 1. (Correction with 51 for the F
side, and 52 for the R side. ... 59 for the F side, and 60 for the
R side. Similar when the set value is decreased.) When, how-
ever, the alignment plate lower cannot be adjusted due to the
mechanism structure, adjust only on the R side without cor-
recting both of the F and the R side.

4)

Press [OK] key to save the set value.

5)

After completion of the adjustment, make staple copies.

Alignment specification: Within 2.5mm

 

This adjustment is executed when a paper exit jam occurs or when
roller marks of the paper delivery roller are attached to paper.

1)

Execute Sim3-10.

2)

Select "2: FDRLM ADJUST".

3)

Enter the set value with 10-key. (Press [C] key to clear the
entered values.)

Initial value: 50

When the adjustment value is increased by 1, the shift amount
of the paper delivery roller is changed by 0.13mm toward the
pressure increasing side (*1).

When the adjustment value is decreased by 1, the shift
amount of the paper delivery roller is changed by 0.13mm
toward the pressure decreasing side (*1).

*1: The pressure increasing side means the direction to 

increase the paper delivery roller pressure onto paper, and 
the pressure decrease side means the direction to 
decrease the paper delivery roller pressure onto paper. 

4)

Press [OK] key to save the set value.

ADJ1

Paper alignment width adjustment

3-10

ADJ2

Paper delivery roller descending position 
adjustment

3-10

㻝㻜㻌㼗㼑㼥㻌

 

㻝㻜㻌㼗㼑㼥㻌