Read Sharp MX-FN12 Service Manual online
MX-FN12 ADJUSTMENTS 3 – 1
MX-FN12
Service Manual
[3] ADJUSTMENTS
1. General
Perform an adjustments when a problem occurs.
If the adjustment value is changed when there is no trouble in the
machine, a trouble may be generated such as improper alignment
of paper, paper exit jam, attachment of roller marks on paper, etc.
If the adjustment value is changed when there is no trouble in the
machine, a trouble may be generated such as improper alignment
of paper, paper exit jam, attachment of roller marks on paper, etc.
2. List of adjustment items
3. Details of adjustment and setting
ADJ 1
Paper alignment width
adjustment
adjustment
This adjustment is executed when a trouble occurs in paper align-
ment.
1)
ment.
1)
Execute Sim3-10.
2)
Select "A: FPAM ADJUST".
• 4.3 Inch LCD model
• 4.3 Inch LCD model
• 7.0/8.5 Inch LCD model
3)
Enter the set value with 10-key. (Press [C] key to clear the
entered values.)
Initial value: 50
When the adjustment value is increased by 1, the alignment
plate F/R width is narrowed by 0.419mm in alignment opera-
tion.
When the adjustment value is decreased by 1, the alignment
plate F/R width is widened by 0.419mm in alignment operation.
entered values.)
Initial value: 50
When the adjustment value is increased by 1, the alignment
plate F/R width is narrowed by 0.419mm in alignment opera-
tion.
When the adjustment value is decreased by 1, the alignment
plate F/R width is widened by 0.419mm in alignment operation.
The alignment plate F and the alignment plate R cannot be
adjusted separately. The shift amount on the F side and that
on the R side are alternatively corrected everytime the adjust-
ment value is increased by 1. (Correction with 51 for the F
side, and 52 for the R side. ... 59 for the F aide, and 60 for the
R side. Similar when the set value is decreased.)
adjusted separately. The shift amount on the F side and that
on the R side are alternatively corrected everytime the adjust-
ment value is increased by 1. (Correction with 51 for the F
side, and 52 for the R side. ... 59 for the F aide, and 60 for the
R side. Similar when the set value is decreased.)
4)
Press [OK] key to save the set value. (For the 4.3 Inch LCD
model, press the OSA shortcut key.)
model, press the OSA shortcut key.)
5)
After completion of the adjustment, make staple copies.
Alignment specification: Within 2.5mm
Alignment specification: Within 2.5mm
ADJ 2
Paper delivery roller
descending position
adjustment
descending position
adjustment
This adjustment is executed when a paper exit jam occurs or when
roller marks of the paper delivery roller are attached to paper.
1)
roller marks of the paper delivery roller are attached to paper.
1)
Execute Sim3-10.
2)
Select "B: FDRLM ADJUST".
• 4.3 Inch LCD model
• 4.3 Inch LCD model
• 7.0/8.5 Inch LCD model
3)
Enter the set value with 10 key. (Press [C] key to clear the
entered values.)
Initial value: 50
When the adjustment value is increased by 1, the shift amount
of the paper delivery roller is changed by 0.11mm toward the
pressure increasing side (*1).
When the adjustment value is decreased by 1, the shift
amount of the paper delivery roller is changed by 0.11mm
toward the pressure decreasing side (*1).
*1: The pressure increasing side means the direction to
entered values.)
Initial value: 50
When the adjustment value is increased by 1, the shift amount
of the paper delivery roller is changed by 0.11mm toward the
pressure increasing side (*1).
When the adjustment value is decreased by 1, the shift
amount of the paper delivery roller is changed by 0.11mm
toward the pressure decreasing side (*1).
*1: The pressure increasing side means the direction to
increase the paper delivery roller pressure onto paper, and
the pressure decrease side means the direction to
decrease the paper delivery roller pressure onto paper.
the pressure decrease side means the direction to
decrease the paper delivery roller pressure onto paper.
4)
Press [OK] key to save the set value.
(For the 4.3 Inch LCD model, press the OSA shortcut key.)
(For the 4.3 Inch LCD model, press the OSA shortcut key.)
Job No
Adjustment items
Simulation
to be used
ADJ1
Paper alignment width adjustment
3-10
ADJ2
Paper delivery roller descending position
adjustment
adjustment
3-10
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
$˖
˷̚˹
),1,6+(5$'-8670(17
˖)3$0$'-867
$˖
˖)'5/0$'-867
%˖
7(67
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
%˖
˷̚˹
),1,6+(5$'-8670(17
˖)3$0$'-867
$˖
˖)'5/0$'-867
%˖
7(67
B
Click on the first or last page to see other MX-FN12 service manuals if exist.