Read Sharp MX-FN12 Service Manual online
MX-FN12 EXTERNAL VIEW AND INTERNAL STRUCTURE 2 – 2
2. Detectors and rollers
Detectors
Rollers
Signal name
Name
Type
Function/Operation
NOTE
FAPHPS-F
Paper alignment plate home
position detector F
position detector F
Transmission type
Detects the home position of the paper alignment plate on the
front side.
front side.
FAPHPS-R
Paper alignment plate home
position detector R
position detector R
Transmission type
Detects the home position of the paper alignment plate on the
rear side.
rear side.
FDRPS
Delivery roller position
detector
detector
Transmission type
Detects that the delivery roller is in the home position.
FDTLLS
Delivery tray lower limit
detector
detector
Transmission type
Detects the lower limit position of the paper delivery tray.
FDTULS
Delivery tray upper limit
detector
detector
Transmission type
Detects the upper limit of the paper delivery tray (movable
section) to judge paper empty in the tray.
section) to judge paper empty in the tray.
FPLD
Paper level detector
Transmission type
Detects the paper height position of the paper delivery tray
(movable section).
(movable section).
FPPD1
Paper pass detector
Transmission type
Detects paper entry in the finisher.
FPRD-C
Paper rear edge detector C
Transmission type
Detects that the rear edge of paper transported to the
compiler reaches the rear edge of the compiler.
compiler reaches the rear edge of the compiler.
FPRD-F
Paper rear edge detector F
Transmission type
FPRD-R
Paper rear edge detector R
Transmission type
FSED
Staple empty detector
Detects empty of spare staples in the stapler.
FSLD
Staple lead detector
Detects the staple position of the stapler.
FSHPS
Staple home position sensor
Detects the standby position of the stapler.
FSTPD
Staple tray paper detector
Transmission type
Detects paper presence in the staple compiler.
No.
Name
Function/Operation
NOTE
1
Paper delivery roller
Discharges paper from the staple compiler to the paper delivery tray.
2
Take-up roller
Transports paper which is transported into the staple compiler to the rear edge plate.
3
Paper entry roller (Idle)
Applies a pressure to paper and the transport roller to give a transport power of the
transport roller to paper.
transport roller to paper.
4
Paper entry roller
Transports paper (which is transported from the copier) to the staple compiler.
5
Rear edge take-up roller
Drives paper (which is transported to the staple compiler) to the rear edge plate.
6
Paper delivery roller (Idle)
Gives a transport power of the transport roller to paper.
1
2
3
4 5
6
FDRPS
FPPD1
FPRD-F
FSHPS
FSLD
FSED
FSLD
FSED
FPRD-C
FPRD-R
FPRD-R
FSTPD
FPLD
FAPHPS-F
FAPHPS-R
FAPHPS-R
FDTULS
FDTLLS
Click on the first or last page to see other MX-FN12 service manuals if exist.