MX-CF11, MX-6240N, MX-7040N (serv.man3). MX-CF11 Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 3

Read Sharp MX-CF11 / MX-6240N / MX-7040N (serv.man3) Service Manual online

MX-7040N  MX-CF11 (INSERTER)  17 – 3
D. Paper guide C (bundled with the decurler unit) 
installation
1)
Install the paper guide C (bundled with the decurler unit No.13)
to the paper feed side of the inserter with the screws (bundled
with the decurler unit No.1). 
E. Installation of the connection plate and the 
protection Mylar to the decurler unit
1)
Remove the decurler unit plates.
2)
Attach the protection sheet (bundled with the decurler unit
No.14) to the decurler unit with the screw (bundled with the
decurler unit No.1).
MEMO: Temporarily attach the protection sheet to the decurler
unit with the duplex tape (back of the protection sheet), then fix
it with the screw.
3)
Attach the connection plate F/R (Packed items No.8, 9) to the
decurler unit with the screws (Packed items No.18 Screw
4x6L).
F. Connection with the decurler unit
1)
Open the inserter front upper cover, remove the screw, and
pull the lock lever toward you.
2)
Connect the inserter to the decurler unit. 
Insert the pin in the decurler unit side into the unit hole.
Photo viewed from the R side
3)
Push up the lock lever to lock the unit and the decurler unit.
Use the removed screw to fix the lock lever.
MEMO: If they cannot be locked, follow the installing proce-
dures (height adjustment) of the complex machine and options
to adjust the height.
G. Fall-prevention stay storing
1)
Loosen the screw of the fall-prevention stay, and store the
stay.
Fall-prevention stay
1
Page of 5
Display

Click on the first or last page to see other MX-CF11 / MX-6240N / MX-7040N (serv.man3) service manuals if exist.