MX-CF11, MX-6240N, MX-7040N (serv.man3). MX-CF11 Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 4

MX-7040N  MX-CF11 (INSERTER)  17 – 4

For installation of the tray unit, use manpower of two or more per-
sons.

1)

Remove the rear cover of the tray unit.

2)

Hold the grip of the unit to install it to the inserter.

NOTE: When the tray unit is inserted, the machine becomes

unstable. In order to prevent against falling, therefore,
connect the after-process mechanism (the finisher,
etc.) the fall-prevention to the left side of the inserter
and put the tray unit on it.

3)

Attach the screw (Packed items No. 16) .

4)

Connect five connectors.

5)

Remove the front inner cover. (2 screws)

6)

Fix the tray unit. (2 screws (Packed items No. 16))

7)

Attach the base cover. (1 screw (Packed items No. 3))

8)

Attach the front door to the front inner cover, and attach the L-
hinge pins (Packed items No. 12).

MEMO: Insert the L-hinge pin in the lower section into the back
of the Black Mylar.

Rear cover

Plate grip (Used for installation)

Plate grip

Grip

Screw (M4 x 12)

Connect five connectors.

Front inner cover

Tray unit

Screw (M4 x 12)

Base cover

1