Read Sharp MX-CF11 / MX-6240N / MX-7040N (serv.man3) Service Manual online
MX-7040N MX-CF11 (INSERTER) 17 – 2
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Attaching the cushion
1)
Attach the front surface cushion (Long) (Packed items No. 19)
and the front surface cushion (Short) (Packed items No. 20) to
the reference as shown below.
and the front surface cushion (Short) (Packed items No. 20) to
the reference as shown below.
B. Paper guide B (bundled with the decurler unit)
installation
(When installing the paper folding machine)
(When installing the paper folding machine)
1)
Attach the Black Mylar (Packed items No.10) to the paper
guide B.
guide B.
Attach the Black Mylar to the downstream side of the paper
guide.
guide.
Attachment reference
Attach to the notch in the rear side as the reference.
2)
Fix the connection plate L/R (Finisher side) (Packed items
No.4 and 5) to the paper exit side of the inserter with the
screws (Packed items No.18 Screw 4x6L).
No.4 and 5) to the paper exit side of the inserter with the
screws (Packed items No.18 Screw 4x6L).
3)
Install the paper guide B (bundled with the decurler unit No.12)
to the paper exit side of the inserter with the screws (bundled
with the decurler unit No.1).
to the paper exit side of the inserter with the screws (bundled
with the decurler unit No.1).
NOTE: When connecting the MX-RB13 to the back, attach the
paper guide D (bundled with the relay unit No. 9).
C. Earth plate installation
1)
Remove the earth plate from the lower section of the inserter
and turn the removed earth plate back and attach it as shown
in the photo below..
and turn the removed earth plate back and attach it as shown
in the photo below..
2)
Attach the earth plate (Packed items No.7), and fix it with the
screw (Packed items No.18).
screw (Packed items No.18).
Cushion (Long)
Cushion (Long)
Cushion (Short)
Cushion (Long)
Cushion
Cushion
Cushion (Short)
reference
reference
reference
reference
reference
reference
Attach the cushion (Short) in
series with the cushion (Long).
series with the cushion (Long).
R side
Black Mylar
Notch
Earth plate
1
1
1
1
Click on the first or last page to see other MX-CF11 / MX-6240N / MX-7040N (serv.man3) service manuals if exist.