Read Sharp MX-C300P / MX-C300PE / MX-C300PL Service Manual online
MX-C300P FIRMWARE UPDATE 8 – 2
(1)Firmware update procedure from the USB memory
The firmware update executes by SIM49-01.
1) Insert the media or USB memory which stores the firmware into
the main unit. (Use the USB I/F of the operation panel section.)
2) Enter the SIM49-01.
Select the firmware file to be updated with [up] or [down] key.
The displayed firmware file is changed depending on the files in
the USB thumb drive.
The displayed firmware file is changed depending on the files in
the USB thumb drive.
* When there is no firmware file in the USB memory, “No file
detected” message is displayed.
* The displayed firmware file is changed depending on the
files in the USB thumb drive.
3) Select the file and press [OK] button. Then, the current version
and the new version are displayed.
4) Press [OK] button. Then, the machine is restarted and the
download of the firmware file starts.
* At this moment, do not disconnect the USB memory.
* At this moment, do not disconnect the USB memory.
5) After downloading the firmware file, the upgrading starts.
* At this moment, do not disconnect the USB memory.
6) When the upgrading is finished, the upgrading result is dis-
played.
When the upgrading is finished correctly, the message shown in
the figure is displayed.
the figure is displayed.
When the upgrading is failed, the defective part and the error
code are displayed.
code are displayed.
6LP),50:$5(83'$7(
VIX
VIX
6LP),50:$5(83'$7(
3OHDVHZDLWDPLQXWH
6LP),50:$5(83'$7(
)URP 㸸
7R 㸸
$UH\RXVXUH"
(;(&
'RZQORGHPRGH
'RQRWWXUQWKH
SRZHURII
SRZHURII
3URFHVVLQJ ILQLVKHG
7XUQRIIWKHSRZHU
7XUQRIIWKHSRZHU
Click on the first or last page to see other MX-C300P / MX-C300PE / MX-C300PL service manuals if exist.