MX-C300P, MX-C300PE, MX-C300PL. Service Manual (Revised May 2016). - Sharp Copying Equipment Service Manual (repair manual)

mx-c300p, mx-c300pe, mx-c300pl service manual
Model
MX-C300P MX-C300PE MX-C300PL
Pages
127
Size
26.91 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual (Revised May 2016).
File
mx-c300p-mx-c300pe-mx-c300pl.pdf
Date

Read Sharp MX-C300P / MX-C300PE / MX-C300PL Service Manual online

SERVICE MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
NOTE FOR SERVICING
[1]
PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2]
SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3]
CONSUMABLE PARTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
[4]
EXTERNAL VIEW AND INTERNAL STRUCTURE  . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[5]
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6]
SIMULATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7]
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8]
FIRMWARE UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9]
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] DISASSEMBLY AND ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
[11] OPERATIONAL DESCRIPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
[12] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
[13] OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
TopPage
CONTENTS
CODE: 00ZMXC300PS2E
MX- C300P/C300PE
MX- C300PL
MODEL
DIGITAL FULL COLOR PRINTER
CONTENTS
NOTE FOR SERVICING
1. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . . i
2. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
3. Note for installing site. . . . . . . . . . . . . . . . . . . . . . . . . . . . i
4. Note for handling PWB and electronic parts  . . . . . . . . . .ii
5. Note for repairing/replacing the LSU . . . . . . . . . . . . . . . .ii
6. Note for handling the drum unit, the transfer unit, 
the developing unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
[1]
PRODUCT OUTLINE
1. System diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
2. Product list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
3. Option list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2]
SPECIFICATIONS
1. Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2. Printer function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
3. Power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
4. Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
5. Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . 2-5
6. Ambient conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
[3]
CONSUMABLE PARTS
1. Supply system table. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
2. Maintenance parts list  . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3. Definition of developer/drum life end . . . . . . . . . . . . . . 3-2
4. Production number identification . . . . . . . . . . . . . . . . . 3-3
5. Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . 3-3
[4]
EXTERNAL VIEW AND INTERNAL STRUCTURE
A. External view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
B. Internal Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
C. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
D. Sensor, detector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
E. Switch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
F.
Clutches and solenoids . . . . . . . . . . . . . . . . . . . . . . . . 4-6
G. Motors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
H. Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
I.
Lamps  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
J.
Fans and filters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
K. PWB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
L. Fuses/thermostats . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
[5]
ADJUSTMENTS
1. General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
2. Adjustment item list . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
3. Details of adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6]
SIMULATION
1. General (Including basic operations) . . . . . . . . . . . . . . 6-1
2. List of simulation codes . . . . . . . . . . . . . . . . . . . . . . . . 6-3
3. Details of simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
[7]
TROUBLESHOOTING
1. Error code and troubleshooting . . . . . . . . . . . . . . . . . . 8-1
2. JAM and troubleshooting . . . . . . . . . . . . . . . . . . . . . . 8-22
[8]
FIRMWARE UPDATE
1. Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
2. Update procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9]
MAINTENANCE
1. Necessary work for maintenance. . . . . . . . . . . . . . . . . 9-1
2. Maintenance timing display list  . . . . . . . . . . . . . . . . . . 9-2
3. Maintenance list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
[10] DISASSEMBLY AND ASSEMBLY
1. Disassembly of Units . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
2. Disassembly and assembly of each unit  . . . . . . . . . 10-13
[11] OPERATIONAL DESCRIPTIONS
1. Operation panel section . . . . . . . . . . . . . . . . . . . . . . . 11-1
2. Manual paper feed section. . . . . . . . . . . . . . . . . . . . . 11-2
3. Paper registration section  . . . . . . . . . . . . . . . . . . . . . 11-3
4. Paper feed tray section  . . . . . . . . . . . . . . . . . . . . . . . 11-4
5. Paper exit section. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5
6. Duplex section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
7. LSU section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7
8. OPC drum section . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9
9. Toner supply section  . . . . . . . . . . . . . . . . . . . . . . . . 11-11
10. Developing section. . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
11. Transfer section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
12. Fusing section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16
13. Fan and filter section . . . . . . . . . . . . . . . . . . . . . . . . 11-18
[12] ELECTRICAL SECTION
1. Block diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
2. Power line diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . 12-4
3. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-6
4. Signal list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-11
[13] OTHERS
1. Necessary works when replacing the PWB . . . . . . . . 13-1
2. TOOL LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
CONTENTS
NOTE FOR SERVICING
1. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . . i
2. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
3. Note for installing site. . . . . . . . . . . . . . . . . . . . . . . . . . . . i
4. Note for handling PWB and electronic parts  . . . . . . . . . .ii
5. Note for repairing/replacing the LSU . . . . . . . . . . . . . . . .ii
6. Note for handling the drum unit, the transfer unit, 
the developing unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
[1]
PRODUCT OUTLINE
1. System diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
2. Product list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
3. Option list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2]
SPECIFICATIONS
1. Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2. Printer function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
3. Power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
4. Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
5. Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . 2-5
6. Ambient conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
[3]
CONSUMABLE PARTS
1. Supply system table. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
2. Maintenance parts list  . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3. Definition of developer/drum life end . . . . . . . . . . . . . . 3-2
4. Production number identification . . . . . . . . . . . . . . . . . 3-3
5. Environmental conditions. . . . . . . . . . . . . . . . . . . . . . . 3-3
[4]
EXTERNAL VIEW AND INTERNAL STRUCTURE
A. External view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
B. Internal Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
C. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
D. Sensor, detector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
E. Switch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
F. Clutches and solenoids . . . . . . . . . . . . . . . . . . . . . . . . 4-6
G. Motors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
H. Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
I.
Lamps  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
J. Fans and filters  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
K. PWB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
L. Fuses/thermostats . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
[5]
ADJUSTMENTS
1. General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
2. Adjustment item list . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
3. Details of adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6]
SIMULATION
1. General (Including basic operations) . . . . . . . . . . . . . . 6-1
2. List of simulation codes . . . . . . . . . . . . . . . . . . . . . . . . 6-3
3. Details of simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
[7]
TROUBLESHOOTING
1. Error code and troubleshooting . . . . . . . . . . . . . . . . . . 7-1
2. JAM and troubleshooting . . . . . . . . . . . . . . . . . . . . . . 7-13
[8]
FIRMWARE UPDATE
1. Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
2. Update procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9]
MAINTENANCE
1. Necessary work for maintenance. . . . . . . . . . . . . . . . . 9-1
2. Maintenance timing display list  . . . . . . . . . . . . . . . . . . 9-2
3. Maintenance list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
[10] DISASSEMBLY AND ASSEMBLY
1. Disassembly of Units . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
2. Disassembly and assembly of each unit  . . . . . . . . . 10-13
[11] OPERATIONAL DESCRIPTIONS
1. Operation panel section . . . . . . . . . . . . . . . . . . . . . . . 11-1
2. Manual paper feed section. . . . . . . . . . . . . . . . . . . . . 11-2
3. Paper registration section  . . . . . . . . . . . . . . . . . . . . . 11-3
4. Paper feed tray section  . . . . . . . . . . . . . . . . . . . . . . . 11-4
5. Paper exit section. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5
6. Duplex section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
7. LSU section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7
8. OPC drum section . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9
9. Toner supply section  . . . . . . . . . . . . . . . . . . . . . . . . 11-11
10. Developing section. . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
11. Transfer section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
12. Fusing section  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16
13. Fan and filter section . . . . . . . . . . . . . . . . . . . . . . . . 11-18
[12] ELECTRICAL SECTION
1. Block diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
2. Power line diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . 12-4
3. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-6
4. Signal list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-11
[13] OTHERS
1. Necessary works when replacing the PWB . . . . . . . . 13-1
2. TOOL LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
MX-C300P  NOTE FOR SERVICING - i
MX-C300P
6HUYLFH0DQXDO
NOTE FOR SERVICING
1.
Precautions for servicing
1) When servicing, disconnect the power plug, the printer cable,
the network cable, and the telephone line from the machine,
except when performing the communication test, etc.
It may cause an injury or an electric shock.
2) There is a high temperature area inside the machine. Use
extreme care when servicing.
It may cause a burn.
3) There is a high voltage section inside the machine which may
cause an electric shock. Be careful when servicing.
4) Do not disassemble the laser unit. Do not insert a reflective
material such as a screwdriver in the laser beam path.
It may damage eyes by reflection of laser beams.
5) When servicing with the machine operating, be careful not to
place your hands by belts, gears, chains, and other drive com-
ponents.
6) Do not leave the machine with the cabinet disassembled.
Do not allow any person other than a serviceman to touch
inside the machine. It may cause an electric shock, a burn, or
an injury.
7) When servicing, do not breathe toner, developer, and ink
excessively. Do not get them in the eyes.
If toner, developer, or ink enters you eyes, wash it away with
water immediately, and consult a doctor if necessary.
8) The machine has got sharp edges inside. Be careful not to
damage fingers when servicing.
9) Do not throw toner or a toner cartridge in a fire. Otherwise,
toner may explode and burn you.
10) When replacing the lithium battery on the PWB, use only the
specified battery.
If a battery of different specification is used, the battery may
cause malfunction or breakdown of the machine.
11) When transporting a PWB, be sure to place the PWB in an
anti-static bag.
It may cause a breakdown or malfunctions.
2.
Warning for servicing
1) Be sure to connect the power cord only to a power outlet that
meets the specified voltage and current requirements.
Avoid complex wiring, which may lead to a fire or an electric
shock.
2) If there is any abnormality such as a smoke or an abnormal
smell, interrupt the job and disconnect the power plug.
It may cause a fire or an electric shock.
3) Be sure to connect the grounding wire. If an electric leakage
occurs without grounding, a fire or an electric shock may
result.
For proper machine functionality, the machine must be
grounded.
4) When connecting the grounding wire, never connect it to the
following points.
It may cause an explosion, a fire or an electric shock.
- Gas tube
- Lightning conductor
- A water pipe or a water faucet, which is not recognized as a
grounding object by the authorities.
- Grounding wire for telephone line
5)
Do not damage, break, or twist the power cord.
Do not put heavy objects on the power cable. Do not forcefully
bend or pull the power cable.
It may cause a fire or an electric shock.
6)
Keep the power cable away from a heat source.
Do not insert the power plug with dust on it into a power outlet.
It may cause a fire or an electric shock.
7)
Do not put a metallic object or a container with water in it inside
the machine.
It may cause a fire or an electric shock.
8)
With wet or oily hands, do not touch the power plug, do not
perform servicing, touch the power plug, insert a telephone
jack, or operate the machine with wet or oily hands.
It may cause an electric shock.
3.
Note for installing site
Do not install the machine at the following sites.
1)
Place of high temperature, high humidity, low tempera-
ture, low humidity, place under an extreme change in tem-
perature and humidity.
Paper may get damp and form moisture inside the machine,
causing paper jam or print dirt.
For operating condition, refer to the specifications described
later.
2)
Place of much vibration
It may cause a breakdown.
3)
Poorly ventilated place
An electro-static type copier will produce ozone inside it.
The quantity of ozone produced is designed to a low level so
as not to affect human bodies. However, continuous use of
such a machine may produce an odor of ozone. Install the
machine in a well ventilated place.
4)
Place of direct sunlight.
Plastic parts and toner may be deformed, discolored, or may
undergo qualitative change.
It may cause a breakdown or print quality issues.
5)
Place which is full of organic gases such as ammonium
The organic photoconductor (OPC) drum used in the machine
may undergo qualitative change due to organic gases such as
ammonium.
Installation of this machine near a diazo-type copier may result
in print quality issues.
6)
Place of much dust
When dusts enter the machine, it may cause a breakdown or
print quality issues.
7)
Place near a wall
Some machines require intake and exhaust of air.
If intake and exhaust of air are not properly performed, print
dirt or a breakdown may be a result.
CAUTION
DOUBLE POLE/NEUTRAL FUSING
(200V series only)
Page of 127
Display

Download Sharp MX-C300P / MX-C300PE / MX-C300PL Service Manual (Repair Manual)

Here you can read online and download Sharp MX-C300P / MX-C300PE / MX-C300PL Service Manual in PDF. MX-C300P / MX-C300PE / MX-C300PL service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-C300P / MX-C300PE / MX-C300PL Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.