Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man74) Technical Bulletin online
3/4
No. Item
Details
21 Printer
When CMYK Simulation is ON, the specific image occasionally collapsed. This
problem has been corrected.
problem has been corrected.
22 Printer
If the timing of sending the print job coincides with the timing of redisplaying the WEB
screen, PRI jam occurs. This problem has been corrected.
screen, PRI jam occurs. This problem has been corrected.
23 Printer
Print data with single page/multiple set being specified is printed out with duplex. This
problem has been corrected.
problem has been corrected.
24 Main
unit
Modification has been made to reduce the noise due to FAN factor by changing the
control sequence of each FAN.
control sequence of each FAN.
25 Main
unit
Machine locks up, displaying "Warming Up." and cannot be in Ready.
This problem is corrected.
This problem is corrected.
26 Main
unit
After the machine stops due to JAM with FAX job and then JAM is cleared, when printing
another job within 4 pages, the blank page will be output. This problem has been
corrected.
another job within 4 pages, the blank page will be output. This problem has been
corrected.
27 Main unit
When using IE10, Device Cloning will be unavailable.
28 Main
unit
If the job mode which is set changes in the course of the job, DRUMJAM will occasionally
occur. This problem has been corrected.
occur. This problem has been corrected.
29 Main
unit
If the security setting and IP filter setting are set up, the machine will occasionally lock
up. This problem has been corrected.
up. This problem has been corrected.
30 Main
unit
There are some cases where the machine cannot process the job requested during the
transition to Power Save Mode. This problem has been corrected.
transition to Power Save Mode. This problem has been corrected.
31 Main
unit
If the operation of entering to/recovering from Power Save Mode is repeated, the amount
of the usable memory will be decreasing. This problem has been corrected.
of the usable memory will be decreasing. This problem has been corrected.
32 Main
unit
If the operation of entering to/recovering from Power Save Mode is repeated, the
displayed time will gain approx. average of 0.5-sec. This problem has been corrected.
displayed time will gain approx. average of 0.5-sec. This problem has been corrected.
33 Main
unit
In some cases, U2-00 will appear at start up of the machine. This problem has been
corrected.
corrected.
34 Main
unit
In some cases, the void areas at the leading edge will be gone when printing in B/W
mode. This problem has been corrected.
mode. This problem has been corrected.
35 Main
unit
In some cases, the machine is recovering from Power Save Mode although no one did
anything. This problem has been corrected.
anything. This problem has been corrected.
36 Main unit
Modification has been made to indicate Total Count in B/W and Color separately.
37
Main unit
Modification has been made to change the gear ratio for reducing RSPF noise.
38 Wireless
Modification has been made to indicate the wireless LAN with radio field strength.
39 Wireless
Modification has been made to send the packets regularly when the wireless
infrastructure mode is selected so that the wireless connection to the access point will
not be disconnected.
infrastructure mode is selected so that the wireless connection to the access point will
not be disconnected.
40 Wireless
On the wireless access point mode, IP which is out of the bound will be assigned to the
slave device. This problem has been corrected.
slave device. This problem has been corrected.
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man74) service manuals if exist.