MX-C250, MX-C250E, MX-C250F, MX-C250FE, MX-C250FR, MX-C300F, MX-C300W, MX-C300WE, MX-C300A, MX-C300WR (serv.man74). Bulletin for ROM Update 01.10.E1.00 - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

 
 
 

2/4 

[Description]    Version upgrade (1) 

No. Item 

Details 

1 FAX 

When executing "Initialize Private Data", the data of FAX send quantity, FAX send time, 
and FAX receive time will be cleared.    This problem has been corrected. 

2 FAX 

It is not possible to send the Fax to the specific models which does not outgoing the CED 
signal.    This problem has been corrected.   

3 FAX 

Modification has been made to be able to change the CNG detection time with FAX Soft 
SW096-78:  
  00: 350-650ms  01: 250-650ms 
  10: 150-650ms  11: 100-700ms 

4 FAX 

Small letter "z" cannot be input on Fax Own Number and Name Set.    This problem has 
been corrected. 

5 FAX 

When printing the 2-sided FAX, in some cases, the received data will not be output.   
This problem has been corrected.     

6 FAX 

Modification has been made to fix the Timeout for waiting of the next original when 
reading the original from the document glass to 60seconds regardless of the set time. 

7 FAX 

When receiving the FAX during Power Save Mode, in some cases, the data cannot be 
printed out.    This problem has been corrected. 

8 FAX 

When the memory becomes full, the following problems happen in some cases; 
1) When printing the image data of the received FAX data, the error code will appear and 
cannot print out.     
2) When outputting the hold data, the last page cannot be output.     
Above problems have been corrected. 

9 FAX 

When trying to send the FAX after taking a phone for external line off the hook, FAX 
cannot be sent out.    This problem has been corrected. 

10 FAX 

If

 t

he cycle of call signal from the specific switchboards is short, the data cannot arrive as 

the call signal is not detected or the telephone keeps ringing without receiving the data.   
This problem has been corrected. 
e.g.) - Call signal from the switchboard in UK, Australia, New Zealand, Hong Kong etc     
      (0.4-sec: ON) - (0.2-sec: OFF) - (0.4-sec: ON) - (2.0-sec: OFF) 
      (0.4-sec: ON) - (0.2-sec: OFF) - (0.4-sec: ON) - (3.0-sec: OFF) 
    - Specific private branch exchange 

11 FAX 

Control No. of Timer Sending Reservation Job has been changed from FILE No. of For 
Timer to the FILE No. of Communication.   

12 FAX 

When receiving the image with the size bigger than the paper size (A4/8.5x11) in the 
condition that "Print Style Setting" is set to "Print Actual size", the data will be stored in 
the memory and not be printed out.    This problem has been corrected. 

13 FAX 

When the device on the other end of the line does not respond, the machine does not 
redial the number of times as set up in the case of communication error.    This problem 
has been corrected. 

14 FAX 

If the device on the other end of the line does not respond when performing Fax 
Broadcast, the result is indicated as CANCEL in Transaction Report.    This problem has 
been corrected. 

15 FAX 

After recovering from Preheat Mode, in some cases, the machine cannot read the data of 
original from automatic document feeder.    This problem has been corrected. 

16 Copier 

E7-01 trouble occasionally happens with the configuration of Non-Sort/Multiple Set/Photo 
mode.    This problem has been corrected.   

17 Copier 

When copying 2-sided original with the configuration of 1-sided/Non-Sort/Multiple Set, 
the rotational direction of output image will be switched every single page.    This problem 
has been corrected. 

18 Scanner 

When sending the data with scanner, the number of scanned page is occasionally not 
counted up.    This problem has been corrected. 

19 Scanner 

When using Scan to Network Folder, "CE-04" occasionally happens.    This problem has 
been corrected. 

20 Printer 

The orientation of the image was opposite with "Landscape original - 2-Sided Booklet" 
and "Portrait original - 2-Sided Tablet".    This problem has been corrected.