Read Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man74) Technical Bulletin online
and FAX receive time will be cleared. This problem has been corrected.
signal. This problem has been corrected.
SW096-78:
00: 350-650ms 01: 250-650ms
10: 150-650ms 11: 100-700ms
been corrected.
This problem has been corrected.
reading the original from the document glass to 60seconds regardless of the set time.
printed out. This problem has been corrected.
1) When printing the image data of the received FAX data, the error code will appear and
cannot print out.
2) When outputting the hold data, the last page cannot be output.
Above problems have been corrected.
cannot be sent out. This problem has been corrected.
This problem has been corrected.
e.g.) - Call signal from the switchboard in UK, Australia, New Zealand, Hong Kong etc
(0.4-sec: ON) - (0.2-sec: OFF) - (0.4-sec: ON) - (2.0-sec: OFF)
(0.4-sec: ON) - (0.2-sec: OFF) - (0.4-sec: ON) - (3.0-sec: OFF)
- Specific private branch exchange
Timer to the FILE No. of Communication.
condition that "Print Style Setting" is set to "Print Actual size", the data will be stored in
the memory and not be printed out. This problem has been corrected.
redial the number of times as set up in the case of communication error. This problem
has been corrected.
Broadcast, the result is indicated as CANCEL in Transaction Report. This problem has
been corrected.
original from automatic document feeder. This problem has been corrected.
mode. This problem has been corrected.
the rotational direction of output image will be switched every single page. This problem
has been corrected.
counted up. This problem has been corrected.
been corrected.
and "Portrait original - 2-Sided Tablet". This problem has been corrected.
problem has been corrected.
screen, PRI jam occurs. This problem has been corrected.
problem has been corrected.
control sequence of each FAN.
This problem is corrected.
another job within 4 pages, the blank page will be output. This problem has been
corrected.
occur. This problem has been corrected.
up. This problem has been corrected.
transition to Power Save Mode. This problem has been corrected.
of the usable memory will be decreasing. This problem has been corrected.
displayed time will gain approx. average of 0.5-sec. This problem has been corrected.
corrected.
mode. This problem has been corrected.
anything. This problem has been corrected.
infrastructure mode is selected so that the wireless connection to the access point will
not be disconnected.
slave device. This problem has been corrected.
This problem has been corrected.
execution of Auto resist adjustment has been improved, and at the same time the value
of Sim50-20 "
*OFFSET_SUB_M ⇒ 53
*OFFSET_SUB_Y ⇒ 53
Total Count (English): Totaal Aantal (Wrong) ⇒ Kopieen Totaal aantal (Correct)
processing of reception and print cannot be completed correctly. This problem has
been corrected.
appear on PC even though it does not reach its life. This problem has been corrected.