Read Sharp MX-BMX1 Service Manual online
VI
20 October 2010
NOTE:
The indications like front and rear, left and right refer to the paper transport direction.
The operator manual always has to be available at the place of use of the machine.
In the interest of technical development the company reserves the right to make al-
terations to specifications without prior notice!
•
•
•
CAUTION:
The machine and its peripherals must be installed and maintained by a customer ser-
vice representative who has completed the training course on those models.
Allways follow all warnings marked on, or supplied with, the equipment.
When you disconnect the power plug from the wall outlet, allways pull the plug (not the
cable).
Disconnect the power cord before you move the machine. While moving the machine,
allways exercise care and make sure that the power cord will not be damaged under
the machine.
Allways contact service if relocating the equipment.
Do not move the machine while the machine is running.
Do not open covers while the machine is running.
Do not switch of the power while the machine is running. Make sure the machine cycle
has ended.
Lay the power cord in a way that nobody will stumble over it. Do not place things on
the cord.
Never attempt any maintenace function that is not specifically described in this docu-
mentation.
Always keep magnets and all devices with strong magnetic fields away from the ma-
chine.
If the place of installation is air-conditioned or heated, do not place the the machine
where it will be:
Subject to sudden temperature changes.
Directly exposed to cool air from an air-conditioner.
Directly exposed to heat from a heater.
If the machine is not used over an extended period of time it should be unplugged to
prevent damage in the case of overload.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
GENERAL SAFETY, CONTINUED
Click on the first or last page to see other MX-BMX1 service manuals if exist.