Read Sharp MX-BMX1 Service Manual online
III
20 October 2010
IMPORTANT SAFETY NOTICES
Before disassembling or assembling parts of the Mail Inserting System and pe-
ripherals,
make sure the power cord is unplugged.
The wall outlet should be near the Mail Inserting System and easily accessible.
Note that some components of the Mail Inserting System
and peripherals are sup-
plied with electrical voltage even if the main power switch is turned off.
If any adjustment or operation check has to be made with exterior covers off or
open while the main switch is turned on, keep hands away from electrical or
mechanically driven components.
OBSERVANCE OF ELECTRICAL SAFETY STANDARDS
The Mail Inserting System and its peripherals must be installed and maintained
by a customer service representative who has completed the training course
on those models.
Always connect the equipment to a prop-
erly grounded power source. In doubt, have
the power source checked by a qualified
electrician.
WARNING: Improper connection of the
WARNING: Improper connection of the
equipment grounding conductor can result
in electrical shock.
Always follow all warnings marked on, or
Always follow all warnings marked on, or
supplied with, the equipment.
Always locate the equipment on a solid
Always locate the equipment on a solid
support surface with adequate strength for
the weight of the machine.
Always exercise care in moving or relocat-
Always exercise care in moving or relocat-
ing the equipment.
Always keep magnets and all devices
Always keep magnets and all devices
with strong magnetic field away from the
machine.
Never use a ground adapter plug to connect
the equipment to a power source that lacks
a ground connection terminal.
Never attempt any maintenance function
Never attempt any maintenance function
that is not specifically described in this
documentation.
Never remove the covers or guards that
Never remove the covers or guards that
are fastened with screws, unless you are a
trained Service representative.
Never install the unit near a radiator or any
Never install the unit near a radiator or any
other heat source.
Never override or “cheat” electrical or me-
Never override or “cheat” electrical or me-
chanical interlock devices.
Never operate the equipment if you notice
Never operate the equipment if you notice
unusual noises or odors. Disconnect the
power cord from the power source and call
your customer service engineer to correct
the problem.
PREVENTION OF PHYSICAL INJURY
SAFETY AND ECOLOGICAL NOTES FOR DISPOSAL
Dispose of replaced parts in accordance with local regulations.
Click on the first or last page to see other MX-BMX1 service manuals if exist.