Read Sharp MX-AP14 Service Manual online
MX-AP14 UNPACKING AND INSTALLATION 3 – 10
4)
Attach the locking saddle (Packed item No.6) to the Main unit.
5)
Mount the main unit (Packed item No.1) to the screws on the
fixing plate.
fixing plate.
6)
Fix the main unit with the step screws. (Packed item No.5 of
installing kit and step5)
installing kit and step5)
C. Connector connection
1)
Connect with LAN cable (Packed item No.5) between MFP
and main unit (upper port).
and main unit (upper port).
2)
Put the LAN cable to the locking saddle as shown below.
3)
Connect with RS-232C cable (Packed item No.4) between the
MFP and main unit.
NOTE: Do not connect RS-232C cable to this port.
MFP and main unit.
NOTE: Do not connect RS-232C cable to this port.
4)
Put the RS-232C cable to the locking saddle then locked.
A
Ĭĭ
Į
Note:
Make sure that the resin parts (A)
mounted to the plates (1), (2) is fit
into the groove of the damper (3)
Make sure that the resin parts (A)
mounted to the plates (1), (2) is fit
into the groove of the damper (3)
※Connect to
upper of 2 port
upper of 2 port
(NOTE)
Do not connect
Do not connect
1
: ‘15/Apr
1
Click on the first or last page to see other MX-AP14 service manuals if exist.