MX-AP14. Service Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 12

MX-AP14  UNPACKING AND INSTALLATION  3 – 8

2)

Push [BOOT/SHUTDOWN] button one time to boot up the
Main unit. While booting, power indicator lamp blinks in green,
and then lamp will be solid green after boot up completes.

3)

Plug in of MFP and turning power main switch on and turning
switch power on of the operation panel of MFP.

4)

In case of turning power off of Main unit, push one time to
[BOOT/SHUTDOWN] button (within 1 sec)  Main unit has
stopped, power indicator lamp is lights off.

5)

Turning power off of the Main unit. 

6)

Plug off of the Main unit.

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.

1)

Remove the screw and the right rear cover.

2)

Cut the line of the cover from back side.

3)

Remove the screws and pull out the MFP PWB unit.

Ĭ

ĭ

Ĭ

ĭ

Į

: ‘15/Apr