MX-6580N, MX-7580N (serv.man2). MX7580N - Handy Guide Version 1 May 2017 - NOTE - Handy Guides are NOT a substitute for Service Manuals and Parts Guides - Sharp Copying Equipment Handy Guide. Page 59

 

 

03  Controller soft switch setting 

SW29-7 

Disable Pop Up Message for Data is 
being cleared (DSK) & Settings of 
machine changed by Web page:- 
0 = Displayed (Default) 
1 = Not displayed 

SW32-4 

Printer MIB (Waste Toner 
Remaining Status for Mac OSX):- 
0 = RFC compliant (Default). 
1 = Non RFC compliant. 

SW34-3 

PDF/PS Preview Thumbnail for 
Direct Print function:- 
0 = Disabled (Default), 1 = Enabled 

SW35-1 

Estimate Job Start time display 
within job status:- 
0 = Disabled (Default), 1 = Enabled 

SW37-5 

Character code of VCF file for 
Business Card Scan setting:- 
0 = UTF-8 (Default) 
1 Character Code of each language 

SW39-5 

Print A5 size paper as A5R from 
Bypass tray:- 
0 = Disabled (Default), 1 = Enabled 

10  Special Stamp setting (Taiwan only)

 

01  Transfer data execution (MFP/SRAM/ 

EEPROM to HDD) 

02  Backup EEPROM/SSD/HDD operation data to 

USB memory 

03  Document filing data backup to USB memory 
04  Job log data backup to USB memory 
05  Export SIM22-06 (Adjustment & Settings 

data) to USB memory 

06  Output SIM23-02 Jam/Trouble data to USB 

memory 

07  Export Syslog data to USB memory 
08  Export ICC Colour profile to USB memory 
15  Import EEPROM data 
99  Export ALL Log data (SIM56-02/04/05/06/07 

& SIM00-11) to USB memory 

 

01  SDRAM read/write test (MFP-SCU PWB) 

 

01  LSU test (Polygon & BD detection check) 
03  LSU power auto setup 

 

04  LSU print image skew adjustment 
11  LSU power correction (automatic) 
12  LSU power manual correction 
13  LSU power correction value reset/clear 
14  LSU power setting collective input 

 

01  HDD/SSD Card format  
02  HDD partial read/write check 
03  HDD read/write check (all areas) 
06  Smart (HDD) self-diagnostic test  
07  Smart (HDD) self-diagnostic error log 
08  HDD/SSD Card format (excluding system & 

operation manual area) 

10  Job completion list clear (with job log) 
11  Document filing data clear 
12  Enable/disable auto format for HDD trouble 
13  HDD format (Operation manual & Watermark 

data only) 

14  Delete document filing management data 
20  Check operation of mirroring hard disk 

 

01  Shading correction data display 
02  Shading correction execution (force) 
03  CCD gamma & colour correction adjustment 
04  Scanner test chart patch density list display 
05  CCD colour balance & gamma default setting 
07  Register the standard target of copy mode 

auto colour balance adjustment (Service) 

08  Set the standard copy mode auto colour 

balance target to factory default (Service) 

11  Set the standard target colour balance 

adjustment (Factory) 

 

01  Test print (Colour mode) 
02  Test print (B/W mode) 
04  Printer self-print test 
05  Printer self-print test (PCL) 
06  Printer self-print test (PS) 

 

01  LCD touch panel adjustment 
02  LCD touch panel adjustment result display 
05  Operation panel key input test