Read Sharp MX-6500N / MX-7500N (serv.man12) Service Manual online
MX-7500N MX-CF11 (INSERTER) 16 – 6
K. Height and tilt adjustment
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased.
NOTE: The specification of the height and the tilt adjustment are as
NOTE: The specification of the height and the tilt adjustment are as
follows.
Height: The difference of level between top surface of the adjacent
Height: The difference of level between top surface of the adjacent
device is within +/-2mm.
Tilt: The difference of clearance between upper and lower part of
Tilt: The difference of clearance between upper and lower part of
the adjacent device is within +/-2mm.
1) Place an adjustment dish under every adjuster bolt, and screw
the bolt. (4 positions)
2) Turn the adju ster bolts (1) and (2) in the above figure, and
adjust the height.
3) Turn the adju ster bolts (3) and (4) in the above figure, and
adjust the tilt.
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man12) service manuals if exist.