Read Sharp MX-6500N / MX-7500N (serv.man12) Service Manual online
MX-7500N MX-CF11 (INSERTER) 16 – 4
3) Push up the lock lever to lock the unit and the decurler unit.
Use the removed screw to fix the lock lever.
MEMO: If they cannot be locked, follow the inst alling proce-
MEMO: If they cannot be locked, follow the inst alling proce-
dures (height adjustment) of the complex machine and options
to adjust the height.
H. Fall-prevention stay storing
1) Loosen the scr ew of the fall- prevention stay, and store the
stay.
I. Tray unit installation
For installation of the tray unit, use manpower of two or more per-
sons.
1) Remove the rear cover of the tray unit.
1) Remove the rear cover of the tray unit.
2) Hold the grip of the unit to install it to the inserter.
NOTE: When the tray unit is in serted, the machine becomes
unstable. In order to prevent against falling, therefore,
connect the after-process mechanism (the finisher,
etc.) the fall-prevention to the lef t side of the inserter
and put the tray unit on it.
3) Attach the screw (Packed items No. 16) .
4) Connect five connectors.
4) Connect five connectors.
5) Remove the front inner cover. (2 screws)
6) Fix the tray unit. (2 screws (Packed items No. 16))
6) Fix the tray unit. (2 screws (Packed items No. 16))
Fall-prevention stay
Rear cover
Plate grip (Used for installation)
Plate grip
Grip
Screw (M4 x 12)
Connect five connectors.
Front inner cover
Tray unit
Screw (M4 x 12)
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man12) service manuals if exist.