MX-6240N, MX-7040N (serv.man21). Section 2 Specifications - Updated November 2012 - Sharp Copying Equipment Service Manual (repair manual). Page 13

Read Sharp MX-6240N / MX-7040N (serv.man21) Service Manual online

MX-7040N  SPECIFICATIONS  2 – 13
7. Power consumption
A. Power consumption
The full configuration can be operated with the rated power source.
*1: Power switch ON, dehumidity heater OFF
8. Dimensions and Weight
9. Ambient conditions
200 V (North America, etc.)
200 V (Europe, etc.)
Maximum rated power Consumption
*1
2880W
1920W + 1920W
Energy consumption rate
Not applicable
TEC value (Measured result)
62cpm machine
7.26kWh
7.32kWh
70cpm machine
7.58kWh
7.76kWh
TEC value (Standard) Tier2
62cpm machine
18.7kWh (0.35kwh * 62 - 3.0 kwh)
70cpm machine
24.0kWh (0.70kwh * 70 - 25.0 kwh)
Network/Fax waiting power consumption: 1W or less
* The network protocol is TCP/IP only.
No
Moving time to pre-heat mode
1 minutes (default)
Recovery time from pre-heat mode
30 sec.
Moving time to sleep mode
15 minutes (default)
16 minutes (Europe)
* Printer mode: 10sec. (default)
Recovery time from sleep mode
Warm-up time or less
Outer dimension 
(Included operation panel)
W845 x D844 x H1222mm
(Operation panel default position)
W845 x D832 x H1222mm 
(When the operation panel is put 
down.)
Footprint
W845 x D844mm
Dimension occupied by the 
machine 
(When the bypass tray is extended)
W1242 x D844mm
(When the bypass tray is extended/
Operation panel default position)
Weight
Main Unit (including photoreceptor / 
not including consumables)
222kg
85%
60%
20%
10°C
30°C
35°C
Humidity (RH)
Temperature
Page of 13
Display

Download Sharp MX-6240N / MX-7040N (serv.man21) Service Manual (Repair Manual)