MX-6240N, MX-7040N (serv.man21). Section 2 Specifications - Updated November 2012 - Sharp Copying Equipment Service Manual (repair manual). Page 11

Read Sharp MX-6240N / MX-7040N (serv.man21) Service Manual online

MX-7040N  SPECIFICATIONS  2 – 11
*1: This function saves all received data in memory and starts out
put after password entry. (Confidential reception is excluded.) 
Setting only on the receiver side.
(6)
Other Functions
(7)
Record Size
(8)
Registration-related settings
*1: Since scan/Internet Fax/Fax uses the common address book, 
the number of addresses allowed for registration is the sum 
total of all modes.
*2: Quick key is the function to select an address based on the 
registered number of each address within the book for address 
selection. Users should be able to select a quick key number.
(9)
Telephone functions
Staple function of received data
Yes
Auto wake up print
Yes
Received data print hold 
*1
Yes
Color toner print when black toner 
runs out.
No
Mode
Image send
Time specification
Yes
Page partition transmission
Yes
Card shot
Yes (Ratio: 63 - 400%)
Forward data transmission/
reception (Document Admin)
Yes
Data transmission by PC-Fax/
PC-Internet Fax is allowed, too.
Mode
FAX
Polling reception
Yes
Bulletin board transmission
Yes 
Up to 100 registrations allowed with 
bulletin board, confidential and relay 
broadcast all combined. (Free area: 
1 registration)
Setting of the number of transmission: 
1/no limit.
Sender print
Yes
Sender selection
Yes
Date print
Yes (Date can be expressed 
alternatively)
Polling protection function
Yes
Page connection
No
Confidential transmission
Yes (F code method) 
Relay broadcast instructions
Yes (F code method) 
Relay broadcast  transmission 
(Fax to e-mail/Internet Fax/ 
Fax (F-code))
Yes
2 in 1
Yes
Mode
FAX
Maximum record width
293mm
Record size
A3 – A5/11 x 17 – 5.5 x 8.5
Mode
FAX
Mode
Image send
Individual/group 
*1
E-mail
FTP
Desktop
SMB
Fax
2000 destinations 
Use of LDAP allowed 
Up to 500 registered addresses for each 
group dial.
Registered name in 36 characters
Fax only
Individual dial receiver number 
registration: within 64 digits for receiver 
number + sub-address + passcode 
(including "/").
Address book registration 
from Resend screen
Yes
Program
Registration of addresses (individual/
group), settings (density, image quality, 
resolution, original) and special functions 
in one set is allowed. (48 + preset 1)
Quick key (short cut 
registration) 
*2
Yes (0001 – 2000)
Readout/read-in of data 
registered in other models
Yes (by the address book conversion 
utility)
Import/export of address book 
Yes (By storage backup) 
Mode
FAX
Number of memory boxes
Registration of bulletin board/
confidential/relay broadcast is allowed up 
to 100.
Registration name: 18 characters
Number of sender registration
Only one set (40 characters) of sender 
information can be registered, and 
Internet FAX addresses or FAX number 
are registered in the name part.
Number of sender selection 
registration
Total: 40 characters (Sender selection: In 
addition to default, 18 registrations 
allowed)
Registration of polling 
approval number
10 numbers/20 digits
Registration of Fax system 
number (Sharp mode)
No
Registration of Fax polling 
approval ID number (Sharp 
mode)
No
Fax relay ID registration 
(Sharp mode)
No
Mode
FAX
On-hook function
Yes
Hold
No
Setting of pause time 
Yes (1 – 15 seconds) 
Telephone transmission during 
power outage 
No (External telephone transmission 
allowed)
Tone pulse switching
Tone, Pulse, Auto (North America/
Taiwan)
* For the other destinations, set with 
the soft switch.
Page of 13
Display

Click on the first or last page to see other MX-6240N / MX-7040N (serv.man21) service manuals if exist.