MX-6240N, MX-7040N (serv.man17). Service Manual (Revised May 2017). - Sharp Copying Equipment Service Manual (repair manual). Page 109

Read Sharp MX-6240N / MX-7040N (serv.man17) Service Manual online

MX-7040N  ADJUSTMENTS AND SETTINGS  5 – 53
 
9-D
(3)
Color copy color balance, gamma 
adjustment (for each color copy mode) 
(No need to adjust normally)
This adjustment is used to execute the color balance adjustment
for each density level in each color copy mode.
This adjustment must be performed in the following cases:
* When there is necessity to change the color balance and gamma
by each the copy mode individually.
* When there is request from the user.
1) Enter the SIM 46-10 mode.
2)
Select the copy mode to be adjusted with the mode key.
3)
Select a color to change the adjustment value with the color
key.
4)
Select the density level (point) to be adjusted with the scroll
key.
5)
Enter the adjustment value with 10-key and press [OK] key.
When the adjustment value is increased, the density is
increased. When the adjustment value is decreased, the den-
sity is decreased.
When the arrow key is pressed, the color densities selected
with the color keys are collectively adjusted.
That is, all the density levels (points) from the low density point
to the high density point can be adjusted collectively.
When [EXECUTE] key is pressed, the adjustment pattern is
printed out.
This adjustment pattern can be used to check the color bal-
ance and the density for each density level (point).
6)
Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
10-key
OK
C
TEXT
 
EXECUTE 
EXECUTE 
or end of print 
[SYSTEM 
 SETTINGS] key
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1(&2/25%$/$1&(0$18$/$'-8670(17
(;(&87(
7(;7
7(;7357ǂ3+272
3+272ˇ7(;73+272
35,17('ǂ3+272
0$3
/,*+7
&23<ǂ25*
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1(&2/25%$/$1&(0$18$/$'-8670(17>7(;7@
˷̚˹
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
.
&
0
<
2.
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1(&2/25%$/$1&(0$18$/$'-8670(17>7(;7@
˷̚˹
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
.
&
0
<
2.
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1(&2/25%$/$1&(0$18$/$'-8670(17>7(;7@
˷̚˹
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
˖32,17
.
&
0
<
2.
(;(&87(
Item/Display
Density level 
(Point)
Adjustment 
value range
Default
A
POINT1
Point 1
1 - 999
500
B
POINT2
Point 2
1 - 999
500
C
POINT3
Point 3
1 - 999
500
D
POINT4
Point 4
1 - 999
500
E
POINT5
Point 5
1 - 999
500
F
POINT6
Point 6
1 - 999
500
G
POINT7
Point 7
1 - 999
500
H
POINT8
Point 8
1 - 999
500
I
POINT9
Point 9
1 - 999
500
J
POINT10
Point 10
1 - 999
500
K
POINT11
Point 11
1 - 999
500
L
POINT12
Point 12
1 - 999
500
M
POINT13
Point 13
1 - 999
500
N
POINT14
Point 14
1 - 999
500
O
POINT15
Point 15
1 - 999
500
P
POINT16
Point 16
1 - 999
500
Q
POINT17
Point 17
1 - 999
500
Page of 127
Display

Click on the first or last page to see other MX-6240N / MX-7040N (serv.man17) service manuals if exist.