Read Sharp MX-6240N / MX-7040N (serv.man17) Service Manual online
MX-7040N ADJUSTMENTS AND SETTINGS 5 – 52
9-D
(2)
Monochrome copy density adjustment
(for each monochrome copy mode)
(separately for the low-density area and the
high-density area)
(No need to adjust normally)
Monochrome copy density adjustment
(for each monochrome copy mode)
(separately for the low-density area and the
high-density area)
(No need to adjust normally)
The density is adjusted in each copy mode individually.
This adjustment must be performed in the following cases:
* When there is necessity to change the copy density of the low
This adjustment must be performed in the following cases:
* When there is necessity to change the copy density of the low
density and high density part at each copy density individually.
* When there is necessity to change the density gradient of the
copy by each the copy mode individually.
* When there is necessity to change all copy density by each the
copy mode individually.
* When there is request from the user.
1) Enter the SIM 46-2 mode.
1) Enter the SIM 46-2 mode.
2)
Select the copy mode to be adjusted with the scroll key.
3)
Enter the adjustment value with 10-key and press [OK] key.
When adjusting the copy density on the low density part, select
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
When adjusting the copy density on the low density part, select
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
4)
Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
OK
㪈㪇㪄㫂㪼㫐
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(;32685($'-8670(17%:>&23<@
$˖
˷̚˹
˖$872
$˖
˖$872
%˖
˖7(;7
&˖
˖7(;735,17('3+272
'˖
˖35,17('3+272
)˖
˖7(;73+272
(˖
˖3+272*5$3+
*˖
˖0$3
+˖
˖7(;7&23<72&23<
,˖
˖7(;735,17('3+272&23<72&23<
-˖
˖35,17('3+272&23<72&23<
.˖
˖/,*+7
/˖
2.
+,*+
/2:
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(;32685($'-8670(17%:>&23<@
$˖
˷̚˹
˖$872
$˖
˖$872
%˖
˖7(;7
&˖
˖7(;735,17('3+272
'˖
˖35,17('3+272
)˖
˖7(;73+272
(˖
˖3+272*5$3+
*˖
˖0$3
+˖
˖7(;7&23<72&23<
,˖
˖7(;735,17('3+272&23<72&23<
-˖
˖35,17('3+272&23<72&23<
.˖
˖/,*+7
/˖
2.
+,*+
/2:
Display/Item
Content
Setting
range
Default
A
AUTO1
Auto 1
LOW
1 - 99
50
HIGH
1 - 99
50
B
AUTO2
Auto 2
LOW
1 - 99
50
HIGH
1 - 99
50
C
TEXT
Text
LOW
1 - 99
50
HIGH
1 - 99
50
D
TEXT/PRINTED
PHOTO
PHOTO
Text/Printed
Photo
Photo
LOW
1 - 99
50
HIGH
1 - 99
50
E
TEXT/PHOTO
Text/Photograph
LOW
1 - 99
50
HIGH
1 - 99
50
F
PRINTED PHOTO
Printed Photo
LOW
1 - 99
50
HIGH
1 - 99
50
G
PHOTOGRAPH
Photograph
LOW
1 - 99
50
HIGH
1 - 99
50
H
MAP
Map
LOW
1 - 99
50
HIGH
1 - 99
50
I
TEXT
(COPY TO COPY)
(COPY TO COPY)
Text (Copy
document)
document)
LOW
1 - 99
50
HIGH
1 - 99
50
J
TEXT/PRINTED
PHOTO
(COPY TO COPY)
PHOTO
(COPY TO COPY)
Text/Printed
Photo (Copy
document)
Photo (Copy
document)
LOW
1 - 99
50
HIGH
1 - 99
50
K
PRINTED PHOTO
(COPY TO COPY)
(COPY TO COPY)
Printed Photo
(Copy document)
(Copy document)
LOW
1 - 99
50
HIGH
1 - 99
50
L
LIGHT
Light document
LOW
1 - 99
50
HIGH
1 - 99
50
Click on the first or last page to see other MX-6240N / MX-7040N (serv.man17) service manuals if exist.