Read Sharp MX-6201N / MX-7001N (serv.man39) Service Manual online
MX-7001N FUSING SECTION O – 18
m. Upper separation pawl, Upper separation pawl SP
1)
Remove the fusing unit. (Refer to the "(1) FUSING UNIT".)
2)
Remove the screws (A). Rotate the fusing web unit (B), and
remove it.
* When installing, engage the fusing web unit (B) to the pawls
remove it.
* When installing, engage the fusing web unit (B) to the pawls
(C) of the upper cover.
* When installing, be careful to prevent bending the electrode
(D), and check that the electrode is contacted.
3)
Remove the screws (E), and remove the separation pawl hold-
ers (F). Disengage the upper separation pawls (G), and
remove the upper separation pawl SPs (H).
ers (F). Disengage the upper separation pawls (G), and
remove the upper separation pawl SPs (H).
n. Separation pawl solenoid, Lower separation pawl, Lower
separation pawl SP
1)
Remove the fusing unit. (Refer to the "(1) FUSING UNIT".)
2)
Remove the screw (A), and remove the cover (B). Disconnect
the connector (C). Remove the screws (D), and remove the
cover R (E).
the connector (C). Remove the screws (D), and remove the
cover R (E).
Unit
Parts
Mainte
nance
1
Fusing unit
D
Upper separation pawl
✕ ▲
E
Upper separation pawl SP
✕ ▲
1-D
1-E
A
A
B
B
C
D
Unit
Parts
Mainte
nance
1
Fusing unit
F
Separation pawl solenoid
–
G
Lower separation pawl
✕ ▲
H
Lower separation pawl SP
✕ ▲
E
H
1-E
1-E
1-D
E
E
F
F
H
G
1-H
1-G
1-F
A
B
C
D
E
D
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man39) service manuals if exist.