Read Sharp MX-6201N / MX-7001N (serv.man39) Service Manual online
MX-7001N FUSING SECTION O – 13
6)
Remove the heater lamp upper sub (O) and the heater lamp
upper main (P).
* When installing the heater lamp upper sub (O) and heater
upper main (P).
* When installing the heater lamp upper sub (O) and heater
lamp upper main (P), the red harnesses (Q) is the rear side.
7)
Remove the screws (R). Rotate the fusing web unit (S), and
remove it.
* When installing, engage the fusing web unit (S) to the pawls
remove it.
* When installing, engage the fusing web unit (S) to the pawls
(T) of the upper cover.
* When installing, be careful to prevent bending the elec-
trodes (U), and check that the electrodes are contacted.
8)
Disconnect the connector (V). Remove the screws (W), and
remove the paper guide (X).
remove the paper guide (X).
9)
Remove the screws (Y), and open the fusing upper unit (Z).
10) Remove the upper heat roller unit (a).
* Don't touch the heat roller surface.
11) Remove the roller stoppers (b), and remove the fusing gear (c)
and the fusing gear F (d). Remove the roller stoppers (e), and
remove the upper roller bearings (f) from the upper heat roller
(g).
remove the upper roller bearings (f) from the upper heat roller
(g).
O
P
1-s
1-t
Q
Q
R
R
S
S
T
U
W
W
X
V
Y
Z
Y
a
b
b
c
d
e
f
f
g
1-v
1-v
1-u
1-w
Click on the first or last page to see other MX-6201N / MX-7001N (serv.man39) service manuals if exist.