Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) Service Manual online
MX-7000N DRIVE SECTION Q – 4
3)
Remove the screws (C). Remove the flywheel (D), the flywheel
(E).
* When installing, check to confirm that has not come in con-
(E).
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the flywheel (D). (Equipping the mark to each color.)
4)
Remove the screws (F), and remove the phase detections (G)
of each color. Disconnect the connectors (H).
of each color. Disconnect the connectors (H).
d. Transfer belt separation sensor CL
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the main drive unit (CL). (Refer to the "(1) Main drive
unit (CL)".)
unit (CL)".)
3)
Disconnect the connector (A), and remove the transfer belt
separation sensor CL (B).
separation sensor CL (B).
B. Main drive unit (BK)
(1) Main drive unit (BK)
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
Unit
Parts
1
Main drive unit (CL)
h
Transfer belt separation sensor CL
D
E
C
F
G
H
G
G
G
1-e
1-f
1-g
1-h
Unit
Parts
Page
1
Main drive unit (BK)
a
Developement drive motor_K
Q - 6
b
Developement drive motor
Q - 7
c
Drum motor_K
Q - 7
d
Belt separation clutch
(normal)
(normal)
Q - 8
e
Belt separation clutch
(reverse)
(reverse)
f
K phase detection
Q - 9
g
Charger cleaner motor
Q -10
h
CCM rotation detection
i
PTC cleaner motor
Q -10
Unit
1
Main drive unit (BK)
A
B
1-h
1-d
1-b
1-i
1-e
1-a
1
1-g
1-c
1-f
1-h
1
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man68) service manuals if exist.