Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man68) Service Manual online
MX-7000N DRIVE SECTION Q – 3
b. Drum motor_Y, Drum motor_M, Drum motor_C
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
3)
Remove the screws (C). Remove the flywheel (D), the flywheel
(E), and the flywheel (F).
* When installing, check to confirm that has not come in con-
(E), and the flywheel (F).
* When installing, check to confirm that has not come in con-
tact with the harness etc.
* When installing, the order of the installation is the flywheel
(E), the flywheel (D). (Equipping the mark to each color.)
The flywheel (F) is out of the order.
The flywheel (F) is out of the order.
4)
Disconnect the connectors (G). Remove the screws (H), and
remove the drum motors (I) of each color.
* Be careful to wiring of harnesses.
remove the drum motors (I) of each color.
* Be careful to wiring of harnesses.
c. Y phase detection, M phase detection, C phase detection
1)
Remove the rear cabinet. (Refer to the "[A] EXTERNAL OUT-
FIT".)
FIT".)
2)
Remove the screws (A), and open the control box (B).
Unit
Parts
1
Main drive unit (CL)
b
Drum motor_Y
c
Drum motor_M
d
Drum motor_C
1-b
1-c
1-d
B
A
A
C
F
D
E
C
Unit
Parts
1
Main drive unit (CL)
e
Y phase detection
f
M phase detection
g
C phase detection
H
H
H
H
H
G
G
I
1-b
G
I
1-c
I
1-d
1-e
1-f
1-g
B
A
A
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man68) service manuals if exist.