Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man64) Service Manual online
MX-7000N TRANSFER SECTION M – 17
4)
Disconnect the connectors (C).
5)
Disconnect the connector (D). Remove the screw (E), and dis-
engage the pawls (F), and remove the electrode holder (G).
engage the pawls (F), and remove the electrode holder (G).
6)
Remove the transfer belt separation BK detection (H).
(2) Sensor inside PTC unit
1)
Remove the paper dust removal cleaner and the PS unit.
(Refer to the "[G] PAPER TRANSPORT SECTION".)
(Refer to the "[G] PAPER TRANSPORT SECTION".)
2)
Remove the charge unit. (Refer to the "[J] PHOTOCON-
DUCTER SECTION".)
DUCTER SECTION".)
3)
Remove the developement unit (BK). (Refer to the "[L]
DEVELOPING UNIT".)
DEVELOPING UNIT".)
4)
Remove the OPC drum unit (BK). (Refer to the "[J] PHOTO-
CONDUCTER SECTION".)
CONDUCTER SECTION".)
5)
Disengage the pawls (A), and remove the sensor inside PTC
unit (B), and disconnect the connector (C).
unit (B), and disconnect the connector (C).
* When installing, be careful to the sensor tilting to the front
side.
C
C
D
G
E
F
F
a
H
Parts
b
Sensor inside PTC unit
b
B
C
A
b
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man64) service manuals if exist.