Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man64) Service Manual online
MX-7000N TRANSFER SECTION M – 14
4)
Remove the spring (B) from the pawl (A). Remove the round
terminal (D) from the pawl (C). Remove the charger wire (E).
Remove the spring (B) form the round terminal (F).
* When installing, hold the round terminal (D). Don't touch the
terminal (D) from the pawl (C). Remove the charger wire (E).
Remove the spring (B) form the round terminal (F).
* When installing, hold the round terminal (D). Don't touch the
wire directly.
* When installing, be careful to dirt of the wire and don't put oil
etc., and be sure to prevent the wire bending or twisting.
D. Secondary transfer separating drive unit
(1) Secondary transfer separating drive unit
1)
Release the lock (A), and open the right door unit (B).
2)
Remove the screws (C), and remove the paper guide (D).
3)
Remove the screws (E), and remove the pressure plate (F)
and springs (G).
and springs (G).
4)
Disconnect the connector (H). Remove the screw (I). Disenage
the pawl (J), and remove the cover (K).
the pawl (J), and remove the cover (K).
5)
Remove the screws (L), and remove the secondary transfer
separation drive unit (M).
separation drive unit (M).
Unit
Parts
Page
1
PTC unit
a
Secondary transfer
separation motor
separation motor
M -15
b
Secondary transfer
separation drive sensor
separation drive sensor
M -15
Parts
1
Secondary transfer drive unit
A
B
C
D
B
F
E
1-c
1
1-a
1-b
A
B
C
C
D
E
E
E
E
F
G
G
I
H
H
K
J
L
L
M
1
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man64) service manuals if exist.