Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man64) Service Manual online
MX-7000N TRANSFER SECTION M – 13
* When installing, be careful to prevent damage of the primary
transfer belt where right side (K) of the PTC unit is a cause.
* When installing, check that rails (L) is engaged.
a. PTC cleaner B, PTC cleaner
1)
Remove the paper dust removal cleaner. (Refer to the “[G]
PAPER TRANSPORT SECTION”.)
PAPER TRANSPORT SECTION”.)
2)
Remove the PTC unit. (Refer to the "(1) PTC unit".)
3)
After disengaging the pawl (A), disengage the pawl (B).
Remove the holder cover (C).
Remove the holder cover (C).
4)
Disenage the pawl (D). Remove the PTC cleaner B (E), and
remove the PTC cleaner (F).
* When installing, check that the charger wire (G) is posi-
remove the PTC cleaner (F).
* When installing, check that the charger wire (G) is posi-
tioned to center of the cleaner pad (H).
* When installing the PTC cleaner B (E), be sure to check that
the pawl (D) and the pawl (I) of the PTC cleaner (F) is
engaged.
engaged.
* When removing or installing, be careful that the charger wire
(G) hang up the lower side (J) of the PTC cleaner (F).
b. Charger wire
1)
Remove the paper dust removal cleaner. (Refer to the “[G]
PAPER TRANSPORT SECTION”.)
PAPER TRANSPORT SECTION”.)
2)
Remove the PTC unit. (Refer to the "(1) PTC unit".)
3)
Remove the PTC cleaner B and PTC cleaner. (Refer to the “a.
PTC cleaner B, PTC cleaner”.)
PTC cleaner B, PTC cleaner”.)
Unit
Parts
Mainte
nance
1
PTC unit
a
PTC cleaner B
▲
b
PTC cleaner
▲
K
L
L
1-b
1-a
A
B
C
Unit
Parts
Mainte
nance
1
PTC unit
c
Charger wire
✕
▲
G
H
J
D
E
I
1-b
F
1-a
1-c
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man64) service manuals if exist.