Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man32) Peripheral online
MX-7000N MX-LCX2 2 – 4
10) Close the right door.
C. Attach of the large capacity tray to the main
unit
1)
Hold the grips of the front and the rear cabinets with both
hands, and lift the left side.
hands, and lift the left side.
2)
Hang the metal fixture of the large capacity tray on the lower
front/rear connecting plate of the main unit side. Push the large
capacity tray onto the main unit and attach it.
front/rear connecting plate of the main unit side. Push the large
capacity tray onto the main unit and attach it.
At that time, pull the large capacity tray in a right direction and
check that a large capacity tray is locked to the main body.
check that a large capacity tray is locked to the main body.
* If lock is incomplete, when the power switch is turned on, the
message, “Check installation of tray 5” is displayed on the
operation panel.
operation panel.
* Push the large capacity tray onto the machine, and lock it
securely.
Note 1)
When lifting the LCC, insert fingers firmly into the grip sections of
the front and rear cabinets and install slowly.
When lifting the LCC, insert fingers firmly into the grip sections of
the front and rear cabinets and install slowly.
Note 2)
Turn the lock release screw of the front cover counterclockwise to
loosen and check that the screw is free.
Turn the lock release screw of the front cover counterclockwise to
loosen and check that the screw is free.
* If the screw is tight at that time, installation will be incomplete.
R
F
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man32) service manuals if exist.