Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Peripheral online
MX-7000N MX-CFX1 5 – 6
4)
Turn the height adjustment bolt on the rear side so that the
height of the center of the positioning pin and the center of the
positioning guide is fit.
height of the center of the positioning pin and the center of the
positioning guide is fit.
5)
Tighten the fixing screws of the adjustment section on the rear
side.
side.
6)
Remove the screw, and open the rack cover.
7)
Loosen the fixing screws of the adjustment section on the front
side.
side.
8)
Turn the height adjustment screws on the front side so that the
fixing screw of the adjustment section on the front side may
become the same position as a rear side.
fixing screw of the adjustment section on the front side may
become the same position as a rear side.
9)
Tighten the fixing screws of the adjustment section on the front
side.
side.
10) Close the rack cover, and fix with the screw.
G. Height adjustment of the finisher and the
inserter
1)
Check the height of front cabinet of the inserter and front cabi-
net of the finisher.
net of the finisher.
Front
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man31) service manuals if exist.