Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man31) Peripheral online
MX-7000N MX-CFX1 5 – 5
E. Installation of the rail
1)
Engage the inserter that has installed finisher (Punch unit) to
the main unit.
the main unit.
2)
Release the lock, and remove the inserter from the main unit.
3)
Fix the rail (Package part No. 5) to the main unit side with the
fixing screws (Package part No. 2).
fixing screws (Package part No. 2).
4)
Fix the rail to inserter with the fixing screws (Package part No.
1).
1).
F. Check of the connected position of main unit
and finisher.
1)
Put the inserter that has installed the finisher (Punch unit)
close to the main unit.
close to the main unit.
2)
Check that the positioning pin of main unit is smoothly installed
to center of the guide for inserter positioning.
to center of the guide for inserter positioning.
* When the positioning pin enters smoothly, progress to the
procedure of "G. Height adjustment of the finisher and the
inserter".
When the positioning pin not enters smoothly, progress to
the following procedures.
inserter".
When the positioning pin not enters smoothly, progress to
the following procedures.
3)
Loosen the fixing screws of the adjustment section on the rear
side of the inserter.
side of the inserter.
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man31) service manuals if exist.