Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man95) Technical Bulletin online
CCE 620R
6. Connect the connector of the heater fixing plate assy (explained on Page 7) to the heater (see the figure
below) and secure it with two M3x4 round-tipped screws.(Tight two screws)
below) and secure it with two M3x4 round-tipped screws.(Tight two screws)
* Screw tightening torque: 1.0 to 1.2 N m
* Secure the connector securely.
* Insert the positioning dowel into the hole.
* Secure the connector securely.
* Insert the positioning dowel into the hole.
7. Secure the heater with the M4x6 bind machine screw.
* Screw tightening torque: 1.6 to 1.8 N m
* The heater pawl must be inserted into the hole.
* The heater pawl must be inserted into the hole.
8. Pass the heater harness through the five clamps and perform wire processing.
- Page 9
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man95) service manuals if exist.