Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man95) Technical Bulletin online
CCE 620R
3. Turn off the machine and heater and remove the glass retainer left, glass retainer right, table glass,
delivery cover, and relay path UN.
For information about how to remove them, see the Service Manual of each Model.
* Take care that rubbish or dirt do not get into the inside of the scanner.
delivery cover, and relay path UN.
For information about how to remove them, see the Service Manual of each Model.
* Take care that rubbish or dirt do not get into the inside of the scanner.
4. Mount five clamps.
* For the clamp mounting locations and direction, see the figure below.
* Take care not to damage the wire when mounting clamps.
* Take care not to damage the wire when mounting clamps.
5. Remove the two screws from the bottom of the scanner (see the figure below). (Do not use two M3x4S
tight screws and the removed screws.)
- Page 8
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man95) service manuals if exist.