Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man38) Service Manual online
MX-4100N MX-4100N/4101N/5000N/5001N 1 – 10
J. Specifications setup
Used to set the specifications with SIM26 according to the cus-
tomer's request.
tomer's request.
To customize the following items after completion of the destination
setup, change the set values.
setup, change the set values.
K. Image quality check
Check the following items related to the image quality.
(1) Checking and adjustment of the image skew
1)
Press [REGIST] button in SIM50-22 mode to execute the auto-
matic image registration adjustment.
matic image registration adjustment.
2)
The current skew level is displayed on the SKEW display
menu.
menu.
3)
Put down the displayed skew level value.
(Meaning of the skew level value)
* When "R" is displayed in front of the value, turn and click the
* When "R" is displayed in front of the value, turn and click the
skew adjustment screw (LSU) clockwise by the number of the
value.
value.
* When "L" is displayed in front of the value, turn and click the
skew adjustment screw (LSU) counterclockwise by the number
of the value.
of the value.
At that time, the fractional part after the decimal point is rounded.
NOTE: The K (black) image skew level cannot be checked with
this adjustment.
To check and adjust the K (black) image skew, follow the
procedures below and execute the adjustment.
To check and adjust the K (black) image skew, follow the
procedures below and execute the adjustment.
1)
Enter SIM61-4 mode.
2)
Select the paper feed tray with A3 (11" x 17") paper in it by
changing the value of set item B.
changing the value of set item B.
3)
Press [EXECUTE] key.
The check pattern is printed out.
The check pattern is printed out.
4)
Check the printed black image for any skew.
Measure the right angle level by using the six cross patterns
printed in black.
There are following two methods of checking the black image
for any skew (right angle).
Method 1:
Measure the length of the diagonal lines of the rectangle print
pattern. Check the difference in the length of the diagonal lines
for judgment of good or no good
Method 2:
Compare the right angle of vertical side/horizontal side of the
rectangle print pattern and the right angle sides of A3 or 11 x
8.5 paper for judgment of good or no good.
(NOTE) In the case of Method 2, the right angle of paper to be
used may not be exact. Be sure to check the right angle of
paper to be used in advance.
Measure the right angle level by using the six cross patterns
printed in black.
There are following two methods of checking the black image
for any skew (right angle).
Method 1:
Measure the length of the diagonal lines of the rectangle print
pattern. Check the difference in the length of the diagonal lines
for judgment of good or no good
Method 2:
Compare the right angle of vertical side/horizontal side of the
rectangle print pattern and the right angle sides of A3 or 11 x
8.5 paper for judgment of good or no good.
(NOTE) In the case of Method 2, the right angle of paper to be
used may not be exact. Be sure to check the right angle of
paper to be used in advance.
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
2
LCC paper size setting
3
Used to set the auditor specification mode.
5
Used to set the count mode of the total counter and
the maintenance counter.
the maintenance counter.
18
Used to set YES/NO of the toner save mode (Only
in UK and Japan versions)
* For other destination versions, this setup is
in UK and Japan versions)
* For other destination versions, this setup is
made by the user program.
52
Used to set YES/NO of counting when non-print
paper is passed through each counter.
paper is passed through each counter.
53
Used to set YES/NO of user calibration permission.
65
Used to set the limit number of sheets for stapling.
or end of print
EXECUTE
EXECUTE
㪈㪇
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
/68326,7,21$'-8670(176(/)35,17
$˖
˷̚˹
˖08/7,&2817
$˖
˖3$3(5&6
%˖
2.
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
/68326,7,21$'-8670(176(/)35,17
$˖
˷̚˹
˖08/7,&2817
$˖
˖3$3(5&6
%˖
2.
(;(&87(
key
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man38) service manuals if exist.