Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man38) Service Manual online
MX-4100N MX-4100N/4101N/5000N/5001N 1 – 8
2)
Remove the waste toner box.
3)
Detach the LSU cleaning bar from the front cover.
4)
Turn the felt side of the cleaning bar downward and insert it.
Slide it back and forth a few times to clean the LSU dust-proof
glass.
Slide it back and forth a few times to clean the LSU dust-proof
glass.
5)
Replace the LSU claning bar to the front cover and attach the
waste toner box.
waste toner box.
6)
Close the front cabinet.
F. Install of the paper exit tray
1)
Install the paper exit tray (package part No. 4) (A) to the upper
section of the right door.
Install the paper exit full detection actuator (package part No.
5) (B).
* Be careful of the direction of the paper exit full detection
section of the right door.
Install the paper exit full detection actuator (package part No.
5) (B).
* Be careful of the direction of the paper exit full detection
actuator.
G. Installation of the paper holding arm unit
1)
Install the paper holding arm unit (package part No. 6).
* If the MX-FNX9 (Inner Finisher) or the MX-RBX3 (Interface
* If the MX-FNX9 (Inner Finisher) or the MX-RBX3 (Interface
Unit) is installed when installing the main unit, do not install
the paper holding arm unit and the paper exit full detection
actuator.
the paper holding arm unit and the paper exit full detection
actuator.
2
1
A
B
B
1
2
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man38) service manuals if exist.