Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) Service Manual online
MX-4101N SIMULATION 6 – 17
8
8-1
Purpose
Operation test/check/adjustment
Function (Purpose) Used to check and adjust the operations of
the developing voltage in each print mode
and the control circuit.
* When the middle speed is adjusted, the
low speed are also adjusted simulta-
neously.
and the control circuit.
* When the middle speed is adjusted, the
low speed are also adjusted simulta-
neously.
Section
Process (Developing)
Operation/Procedure
1)
1)
Select a speed with [MIDDLE] and [LOW] keys on the touch
panel.
panel.
2)
Select a target item to be adjusted with [
↑] [↓] buttons.
3)
Enter the setting value with 10-key. (The value specified on the
label of the high voltage PWB must be entered.)
* When the U V key is pressed, the setting value of each
label of the high voltage PWB must be entered.)
* When the U V key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
4)
Press [EXECUTE] key.
The set value is saved and the voltage entered with step 3) is
output for 30 sec.
When [EXECUTE] key is pressed, the output is terminated.
The set value is saved and the voltage entered with step 3) is
output for 30 sec.
When [EXECUTE] key is pressed, the output is terminated.
8-2
Purpose
Operation test/check/adjustment
Function (Purpose) Used to check and adjust the operation of
the main charger grid voltage in each
printer mode and the control circuit.
* When the middle speed is adjusted, the
low speed are also adjusted simulta-
neously.
printer mode and the control circuit.
* When the middle speed is adjusted, the
low speed are also adjusted simulta-
neously.
Section
Process (Charging)
Operation/Procedure
1)
1)
Select a speed with [MIDDLE] and [LOW] keys on the touch
panel.
panel.
2)
Select a target item to be adjusted with [
↑] [↓] keys.
3)
Enter the adjustment value with 10-key. (The value specified
on the label of the high voltage PWB must be entered.)
* When the U V key is pressed, the setting value of each
on the label of the high voltage PWB must be entered.)
* When the U V key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
4)
Press [EXECUTE] key.
The set value is saved and the voltage entered with step 3) is
output for 30 sec.
When [EXECUTE] key is pressed, the output is terminated.
The set value is saved and the voltage entered with step 3) is
output for 30 sec.
When [EXECUTE] key is pressed, the output is terminated.
Key
Item/Display
Content
Setting
range
MIDDLE
A
MIDDLE SPEED
DVB_K
DVB_K
K developing bias
set value at middle
speed
set value at middle
speed
0-600
B
MIDDLE SPEED
DVB_C
DVB_C
C developing bias
set value at middle
speed
set value at middle
speed
0-600
C
MIDDLE SPEED
DVB_M
DVB_M
M developing bias
set value at middle
speed
set value at middle
speed
0-600
D
MIDDLE SPEED
DVB_Y
DVB_Y
Y developing bias
set value at middle
speed
set value at middle
speed
0-600
LOW
A
LOW SPEED
DVB_K
DVB_K
K developing bias
set value at low
speed
set value at low
speed
0-600
B
LOW SPEED
DVB_C
DVB_C
C developing bias
set value at low
speed
set value at low
speed
0-600
C
LOW SPEED
DVB_M
DVB_M
M developing bias
set value at low
speed
set value at low
speed
0-600
D
LOW SPEED
DVB_Y
DVB_Y
Y developing bias
set value at low
speed
set value at low
speed
0-600
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'96(77,1*$1'287387
$˖
˷̚˹
˖0,''/(ǂ63(('ǂ'9%B.
$˖
˖0,''/(ǂ63(('ǂ'9%B&
%˖
˖0,''/(ǂ63(('ǂ'9%B0
&˖
˖0,''/(ǂ63(('ǂ'9%B<
'˖
2.
(;(&87(
/2:
0,''/(
Key
Item/Display
Content
Adjustment
range
MIDDLE
A
MIDDLE
SPEED GB_K
SPEED GB_K
K charging/grid bias
set value at middle
speed
set value at middle
speed
150 - 850
B
MIDDLE
SPEED GB_C
SPEED GB_C
C charging/grid bias
set value at middle
speed
set value at middle
speed
150 - 850
C
MIDDLE
SPEED GB_M
SPEED GB_M
M charging/grid bias
set value at middle
speed
set value at middle
speed
150 - 850
D
MIDDLE
SPEED GB_Y
SPEED GB_Y
Y charging/grid bias
set value at middle
speed
set value at middle
speed
150 - 850
LOW
A
LOW SPEED
GB_K
GB_K
K charging/grid bias
set value at low speed
set value at low speed
150 - 850
B
LOW SPEED
GB_C
GB_C
C charging/grid bias
set value at low speed
set value at low speed
150 - 850
C
LOW SPEED
GB_M
GB_M
M charging/grid bias
set value at low speed
set value at low speed
150 - 850
D
LOW SPEED
GB_Y
GB_Y
Y charging/grid bias
set value at low speed
set value at low speed
150 - 850
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
0+9*5,'6(77,1*$1'287387
$˖
˷̚˹
˖0,''/(ǂ63(('ǂ*%B.
$˖
˖0,''/(ǂ63(('ǂ*%B&
%˖
˖0,''/(ǂ63(('ǂ*%B0
&˖
˖0,''/(ǂ63(('ǂ*%B<
'˖
2.
(;(&87(
/2:
0,''/(
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) service manuals if exist.