Read Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) Service Manual online
MX-4101N SIMULATION 6 – 15
6-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of each fan
motor and its control circuit.
Section
Others
Operation/Procedure
1)
1)
Select the item to be operation checked with the touch panel
key.
key.
2)
Press [EXECUTE] key.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
Press [ALL] key to select all the fans collectively.
The selected load performs the operation.
When [EXECUTE] key is pressed, the operation is terminated.
Press [ALL] key to select all the fans collectively.
Load operation check method:
The load operation is checked by the operation sound. However,
there are some loads which cannot be checked with the operation
sound.
The load operation is checked by the operation sound. However,
there are some loads which cannot be checked with the operation
sound.
6-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the primary
transport unit and the control circuit.
Section
Process (Transport)
Operation/Procedure
1)
1)
Press [TC1] or [TC1_R] key to highlight it.
2)
Press [EXECUTE] key, and the load operation set in the above
procedure 1) is started.
(Separation operation of BLACK
procedure 1) is started.
(Separation operation of BLACK
→ COLOR → FREE or
BLACK
→ FREE is repeated.)
[TC1]
[TC1_R]
6-6
Purpose
Operation test/check
Function (Purpose) Used to check the operation of the fusing
separation.
Section
Fusing
Operation/Procedure
1)
1)
Press [FUSER] key to highlight it.
2)
Press [EXCUTE] key, and fusing pressure applying and fusing
pressure release are repeated.
pressure release are repeated.
During this period, the status of the fusing roller pressure is dis-
played.
played.
7
7-1
Purpose
Setting
Function (Purpose) Used to set the operating conditions of
aging.
Section
Others
Operation/Procedure
1)
1)
Select the target to be set with the touch panel key.
2)
Press [EXECUTE] key.
The machine is rebooted in the aging mode.
The machine is rebooted in the aging mode.
The aging operation condition set by this mode is maintained here-
after unless the power is turned off or the setting is changed.
after unless the power is turned off or the setting is changed.
Item/Display
Content
POFM
Paper exit cooling fan motor
(POFM_U, POFM_F and POFM_R are simultaneously
ON.)
(POFM_U, POFM_F and POFM_R are simultaneously
ON.)
OZFM
Ozone fan motor
PSFM
Power cooling fan motor
LSUFM
LSU cooling fan motor
CCFM
Process cooling fan motor
RCFM
Rear cooling fan motor
FUFM
Fusing fan motor
PCSFM
Toner cooling fan motor
CAFM
Cartridge fan motor
MFPFAN
Controller fan motor
BLACK
Monochrome mode
position
position
Monochrome mode position
→ Color
mode position
→ Non-transport
position
→ (Monochrome mode
position) The operation is repeated.
COLOR
Color mode position
FREE
Non-transport
position
position
BLACK
Monochrome mode
position
position
Monochrome mode position
→
Non-transport position
→
(Monochrome mode position) The
operation is repeated.
operation is repeated.
FREE
Non-transport
position
position
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)$1/2$'6(783
32)0
2=)0
36)0
/68)0
&&)0
5&)0
)8)0
3&6)0
&$)0
0)3)$1
(;(&87(
$//
PRINT
Fusing pressure
applying
applying
Fusing pressure applying
→ Fusing
pressure release
→ (Fusing pressure
applying) The operation is repeated.
FREE
Fusing pressure
release
release
AGING
Aging operation setup
INTERVAL
Intermittent setup
MISFEED DISABLE
JAM detection enable/disable setup
FUSING DISABLE
Fusing operation enable/disable setup
WARMUP DISABLE
Warm-up skip setup
DV CHECK DISABLE
DV unit detection enable/disable setup
SHADING DISABLE
Shading disable setup
CCD GAIN FREE
No setting of the CCD gain adjustment
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
75$16)(5/2$'&+(&.
326,7,21ǂǂǂǂǂ˖ǂ
(;(&87(
7&B5
7&
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)86(5/2$'&+(&.
(;(&87(
326,7,21ǂǂǂǂǂ˖ǂ
)86(5
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) service manuals if exist.