Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man9) Service Manual online
MX3500N SIMULATION 7 – 18
7-8
Purpose
Operation display
Function (Purpose) Used to display the warm-up time.
Section
Section
Fusing
Item
Operation
Operation/Procedure
Press [EXECUTE] button.
Counting of the warm-up time is started.
* Interruption of counting by pressing [EXECUTE] button is inhib-
Press [EXECUTE] button.
Counting of the warm-up time is started.
* Interruption of counting by pressing [EXECUTE] button is inhib-
ited.
7-9
Purpose
Operation test/check
Function (Purpose) Used to check printing in the color mode.
Section
Section
—
Item
Operation
Operation/Procedure
1) Select a print color with buttons on the touch panel.
2) Press [EXECUTE] button.
1) Select a print color with buttons on the touch panel.
2) Press [EXECUTE] button.
Printing is started in the selected color.
* If no color is specified, printing is made in all colors.
8
8-1
Purpose
Operation test/Check/Adjustment
Function (Purpose) Used to check and adjust the operations of
the developing voltage of each color and
the control circuit.
the control circuit.
Section
Process (Photoconductor/Developing/
Transfer/Cleaning)
Transfer/Cleaning)
Item
Operation
Operation/Procedure
1) Select a speed with [MIDDLE] and [LOW] (MX-4500N/4501N:
1) Select a speed with [MIDDLE] and [LOW] (MX-4500N/4501N:
[LOW/HIGH]) buttons on the touch panel.
2)
Select a target item to be adjusted with [
↑] [↓] buttons.
3)
Enter the adjustment value with 10-key.
4)
Press [EXECUTE] button.
The set value is saved and the voltage corresponding to the
set value is outputted for 30 sec.
The set value is saved and the voltage corresponding to the
set value is outputted for 30 sec.
* The adjustment values of [MIDDLE] and [LOW] (MX-4500N/
4501N: [LOW/HIGH]) are related together.
* When [EXECUTE] button is pressed, the output is terminated.
8-2
Purpose
Operation test/Check/Adjustment
Function (Purpose) Used to check and adjust the operation of
the main charger grid voltage in each
printer mode and the control circuit.
printer mode and the control circuit.
Section
Process (Photoconductor/Developing/
Transfer/Cleaning)
Transfer/Cleaning)
Item
Operation
Operation/Procedure
1)
1)
Select a speed with [MIDDLE] and [LOW] (MX-4500N/4501N:
[LOW/HIGH]) buttons on the touch panel.
[LOW/HIGH]) buttons on the touch panel.
2)
Select a target item to be adjusted with [
↑] [↓] buttons.
3)
Enter the adjustment value with 10-key.
4)
Press [EXECUTE] button.
The set value is saved and the voltage corresponding to the
set value is outputted for 30 sec.
The set value is saved and the voltage corresponding to the
set value is outputted for 30 sec.
* The adjustment values of [MIDDLE] and [LOW] (MX-4500N/
4501N: [LOW/HIGH]) are related together.
* When [EXECUTE] button is pressed, the output is terminated.
K
Setup/cancel of black
C
Setup/cancel of cyan
M
Setup/cancel of magenta
Y
Setup/cancel of yellow
0
SIMULATION NO.07
̆08
TEST
WARM
UP
TIME
DISPLAY
SETTING
CLOSE
EXECUTE
0
SECONDS
CLOSE
0
K
SIMULATION
NO.07̆09
TEST
PRINTING
COLOR
SELECT(COLOR
MODE)
C
M
Y
1/1
EXECUTE
Button
Item
Display
Content
Setting
range
Default
value
MIDDLE
A
MIDDLE
SPEED
DVB_K
SPEED
DVB_K
K developing
bias set value at
middle speed
bias set value at
middle speed
0 to 700
450
B
MIDDLE
SPEED
DVB_C
SPEED
DVB_C
C developing
bias set value at
middle speed
bias set value at
middle speed
0 to 700
450
C
MIDDLE
SPEED
DVB_M
SPEED
DVB_M
M developing
bias set value at
middle speed
bias set value at
middle speed
0 to 700
450
D
MIDDLE
SPEED
DVB_Y
SPEED
DVB_Y
Y developing
bias set value at
middle speed
bias set value at
middle speed
0 to 700
450
LOW
A
LOW
SPEED
DVB_K
SPEED
DVB_K
K developing
bias set value at
low speed
bias set value at
low speed
0 to 700
430
B
LOW
SPEED
DVB_C
SPEED
DVB_C
C developing
bias set value at
low speed
bias set value at
low speed
0 to 700
430
C
LOW
SPEED
DVB_M
SPEED
DVB_M
M developing
bias set value at
low speed
bias set value at
low speed
0 to 700
430
D
LOW
SPEED
DVB_Y
SPEED
DVB_Y
Y developing
bias set value at
low speed
bias set value at
low speed
0 to 700
430
HIGH
(MX-4500N/
4501N only)
(MX-4500N/
4501N only)
E
HIGH
SPEED
DVB_K
SPEED
DVB_K
K developing
bias set value at
high speed
bias set value at
high speed
0 to 700
450
㩷
0
A:
A
㧦450
B
㧦450
C
㧦450
㧧 MIDDLE SPEED DVB_K
㧧 MIDDLE SPEED DVB_C
㧧 MIDDLE SPEED DVB_M
SIMULATION
NO.08㧙01
DV
SETTING
AND
OUTPUT
450
㨇 0㨪 700㨉
OK
TEST
CLOSE
EXECUTE
D
㧦450
㧧 MIDDLE SPEED DVB_Y
LOW
MIDDLE
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man9) service manuals if exist.