Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man9) Service Manual online
MX3500N SIMULATION 7 – 17
6-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of each fan
motor and its control circuit.
Section
Other
Item
Operation
Operation/Procedure
1) Select the item to be checked with the buttons on the touch
1) Select the item to be checked with the buttons on the touch
panel.
2) Press [EXECUTE] button.
The selected load operation is performed.
When [EXECUTE] button is pressed, the operation is termi-
nated.
When [EXECUTE] button is pressed, the operation is termi-
nated.
6-3
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the primary
transfer unit and the related circuit.
Section
Process (Transfer)
Item
Operation
Operation/Procedure
1) Press [EXECUTE] button.
2) The load operation is started. (Separation operation: BLACK
1) Press [EXECUTE] button.
2) The load operation is started. (Separation operation: BLACK
→ COLOR → FREE Stops at each position for 5 sec.) During
the operation, the current position is displayed.
the operation, the current position is displayed.
7
7-1
Purpose
Setting
Function (Purpose) Used to set the operating conditions of
aging.
Section
Other
Item
Operation
Operation/Procedure
1)
1)
Select the target to be set with buttons on the touch panel.
2)
Press [EXECUTE] button.
The machine is rebooted in the aging mode.
The contents set with this simulation are retained until the
power is turned OFF.
The machine is rebooted in the aging mode.
The contents set with this simulation are retained until the
power is turned OFF.
7-6
Purpose
Setting
Function (Purpose) Used to set the intermittent aging cycle.
Section
Section
Other
Item
Operation
Operation/Procedure
1)
1)
Enter the intermittent aging cycle (unit: sec) with 10-key.
2)
Press [OK] button.
The time entered in procedure 1) is set.
The time entered in procedure 1) is set.
POFM
Paper exit cooling fan motor (* POFM_U, POFM_F, and
POFM_R are driven at the same time.)
POFM_R are driven at the same time.)
OZFM
Ozone fan motor
PSFM
Power cooling fan motor
LSUFM
LSU cooling fan motor
BLACK
Black mode position
Black mode position
→ COLOR mode position
→ Drum separation position
→ Shift to the black mode
position is repeated.
→ COLOR mode position
→ Drum separation position
→ Shift to the black mode
position is repeated.
COLOR
COLOR mode position
FREE
Drum separation position
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
CLOSE
0
SIMULATION
NO.06̆01
TEST
FEED
OUTPUT CHECK
EXECUTE
1/2
PFM
FUM
CPFM
OSM
CPFC
1TURC
PCSS
WTNM
CLUM1
CPUC1
CLUM2
CPUC2
MPUC
RRM
POMF
POMR
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
SIMULATION
NO.06̆02
TEST
FAN
LOAD
SETUP
POFM
OZFM
LSUFM
PSFM
1/1
EXECUTE
0
CLOSE
0
SIMULATION
NO.06̆03
TEST
TRANSFER LOAD CHECK
EXECUTE
POSITION
̆̆
:
1/1
CLOSE
AGING
Aging operation setup
INTERVAL
Intermittent setup
MISFEED DISABLE
JAM detection enable/disable setup
FUSING DISABLE
Fusing operation enable/disable setup
WARMUP DISABLE
Warm-up disable setup
DV CHECK DISABLE
DV unit detection enable/disable setup
SHADING DISABLE
Shading disable setup
CCD GAIN FREE
CCD gain adjustment free setup
Item
Item
Set range
Default value
A
CYCLE TIME(SEC)
1 to 900
3
SIMULATION
NO.07̆01
TEST
AGING
TEST SETTING
AGING
INTERVAL
MISFEED
DISABLE
FUSING
DISABLE
WARMUP
DISABLE
DV
CHECK
DISABLE
1/1
EXECUTE
0
SHADING
DISABLE
CCD
GAIN
FREE
CLOSE
0
A:
A
㧦 3
㧧 CYCLE TIME(SEC)
SIMULATION
NO.07-06
INTERVAL
AGING CYCLE TIME SETUP
3
㨇 1㨪 900 㨉
OK
TEST
CLOSE
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man9) service manuals if exist.