Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man118) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-346/363/378/428/441
No
Subject
Description
47
User Control menu of
WEB Page
WEB Page
Modification has been implemented to display "User Control" menu in any Authority
pages (Administrator/User/Service) on the menu of WEB Page.
pages (Administrator/User/Service) on the menu of WEB Page.
48
Authority group
duplicated by device
cloning
duplicated by device
cloning
When importing the authority groups, they were added without overwriting, so some
authority groups which had the same name existed:
Modification has been implemented to overwrite instead of adding when importing.
authority groups which had the same name existed:
Modification has been implemented to overwrite instead of adding when importing.
49
Addition of Port
Control in Web
Settings List
Control in Web
Settings List
The setting of "Security Settings (Port Control)" has been added in Web Settings List.
50
Serial number print
on Setting List
on Setting List
When printing the setting lists etc., we could not find the setting information belonged to
which machine. Modification has been implemented to print the serial number in the list
to recognise the information.
which machine. Modification has been implemented to print the serial number in the list
to recognise the information.
51
Coin Vendor
Interface
Interface
Support is provided for the serial interface of coin vendor.
52
Coin-vend - colour
status signals on MX-
series
status signals on MX-
series
On the interface of Coin-Vendor, Colour Status Signal
(CV_COLOR0、 CV_COLOR1） after the job completion retained the last colour status,
but the modification has been made to retain B/W status.
(CV_COLOR0、 CV_COLOR1） after the job completion retained the last colour status,
but the modification has been made to retain B/W status.
7. Upgrade 5
From July 2006 production
ROM control No.
ICU
(PROGRAM)
ICU
(BOOT)
PCU
SCU
DSPF
IMAGE
DATA
FAX
C00
0201J0
* 0201J0
0110J0
0110J0
0110J0
0100J0
010300
*The version of the above ICU (BOOT) is the version written in the ROM control label. Check that
the actual version of this ICU is
“ICU (BOOT): 01.00.00/LANGUAGE: 01.28.00/GRAPHIC: 01.03.00” by using Sim22-5.
Item of change: See below.
No.
Subject
Description
1
Correction of size
illegal jam
illegal jam
If the paper size is different from the size detected by the machine, it used to be handled
as the illegal jam. Modification has been implemented not to handle it as the jam but to
output it as the invalid paper and display the message "Please check the paper size".
as the illegal jam. Modification has been implemented not to handle it as the jam but to
output it as the invalid paper and display the message "Please check the paper size".
On the system with the options of Finisher Desk etc., it is necessary to upgrade the
version of firmware for those options at the same time.
version of firmware for those options at the same time.
(MX-FNX1/FNX2 : 010300, MX-DEX3/DEX4 : 0101J0)
2
Value of Colour
Balance Manual
Adjustment cannot be
reflected into User
Auto Calibration
Balance Manual
Adjustment cannot be
reflected into User
Auto Calibration
On Colour Balance Manual Adjustment, modification has been implemented to reflect the
adjustment value after the manual adjustment and the value after conducting Half Tone
Density Correct Execution into User Auto Calibration.
adjustment value after the manual adjustment and the value after conducting Half Tone
Density Correct Execution into User Auto Calibration.
Even before this change is implemented, there’s no problem for the users who adjust the
colour balance only with Auto.
colour balance only with Auto.
3
Fax Reception
sometimes fails in
1W Energy Save
Mode
sometimes fails in
1W Energy Save
Mode
Under the conditions of "1W Energy Save Mode", "Auto Switch of TEL/FAX: ON",
"Number of Auto Reception Call: less than twice", and "External Telephone
Setting/Connecting Optional Receiver: ON", when recovering from Energy Save Mode
after Fax reception, there were some cases where Fax reception could not be done due
to the time-out from FAXBOX side.
"Number of Auto Reception Call: less than twice", and "External Telephone
Setting/Connecting Optional Receiver: ON", when recovering from Energy Save Mode
after Fax reception, there were some cases where Fax reception could not be done due
to the time-out from FAXBOX side.
Some areas where possibly takes time for processing on the firmware of the main unit
has been corrected, and the setting of time-out to receive the notification of
"Communication Start" has been changed from 10secs to 33secs on the firmware of
FAXBOX side.
has been corrected, and the setting of time-out to receive the notification of
"Communication Start" has been changed from 10secs to 33secs on the firmware of
FAXBOX side.
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man118) service manuals if exist.