Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man118) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-346/363/378/428/441
No
Subject
Description
34
Ignoring command
for number of copies
for number of copies
If the number of sets were specified with the PCL command, the Collate setting internally
remained ON, and Uncollate mode did not work:
Modification has been implemented to be able to switch Collate setting as well when
processing PCL Copy Command.
remained ON, and Uncollate mode did not work:
Modification has been implemented to be able to switch Collate setting as well when
processing PCL Copy Command.
35
Shaded characters
are printed being
crushed
are printed being
crushed
If a PDF file created by Illustrator was printed from AcrobatReader on PS mode, a part of
the shaded characters were printed with being crushed:
This glitch has been corrected.
the shaded characters were printed with being crushed:
This glitch has been corrected.
36
Bad reproduction of
the colours when
direct printHPGL files
the colours when
direct printHPGL files
When printing the HP-GL data with Direct Print, a part of the image had a different colour
as that of the HP printer. When printing the HP-GL data with Direct Print, colour was
converted in RGB mode because PJL command in Colour mode setting was not
specified:
Modification has been implemented to convert the colour in RGB mode even if Colour
mode setting is not specified.
as that of the HP printer. When printing the HP-GL data with Direct Print, colour was
converted in RGB mode because PJL command in Colour mode setting was not
specified:
Modification has been implemented to convert the colour in RGB mode even if Colour
mode setting is not specified.
37
Grayscale print
problem in a specific
mode in PS
problem in a specific
mode in PS
In Colour/Custom setting of PostScript Printer Driver UI, even if rendering indent was set
to "saturation priority" and grey print mode was set to "4 colours", the image object was
printed in black only:
Modification has been implemented to print the grey area of the image object in 4
colours under the above settings.
to "saturation priority" and grey print mode was set to "4 colours", the image object was
printed in black only:
Modification has been implemented to print the grey area of the image object in 4
colours under the above settings.
38
Recovery from power
save mode in Mac
environment
save mode in Mac
environment
Since Multicast was not included in the recovery conditions from the power save mode,
neither recovery nor reply was made to the Apple Talk's request, which was informed via
Multicast packet. Even under the Mac environment, it is possible to recover from the
power save mode when selecting IP print instead of Apple Talk.
Multicast has been added against the current recovery conditions in order to recover and
reply to the request from Apple Talk.
neither recovery nor reply was made to the Apple Talk's request, which was informed via
Multicast packet. Even under the Mac environment, it is possible to recover from the
power save mode when selecting IP print instead of Apple Talk.
Multicast has been added against the current recovery conditions in order to recover and
reply to the request from Apple Talk.
39
E-mail to print issue
If a command other than E-Mail Print command existed in the text of E-mail,
unnecessary data was added into the print data when the data volume from the text
exceeded approx. 500 bytes, and printing could not be carried out properly:
Modification has been implemented not to add unnecessary data.
unnecessary data was added into the print data when the data volume from the text
exceeded approx. 500 bytes, and printing could not be carried out properly:
Modification has been implemented not to add unnecessary data.
40
Garbled characters
appear
appear
When printing the specific data in the grayscale mode with PCL6, certain objects were
blacked out.
This glitch has been corrected.
blacked out.
This glitch has been corrected.
41
Mediatype problem
Since the processing which conducts the image handling was missing when receiving
the designated command for paper type, printing was made without rotating 90-degree:
This glitch has been corrected by adding the Image handling process.
the designated command for paper type, printing was made without rotating 90-degree:
This glitch has been corrected by adding the Image handling process.
42
UEL Command
Causes Blank Page
to Print Instead of
Job
Causes Blank Page
to Print Instead of
Job
There was the problem that PCL macro specified as permanent was deleted when PCL
job was complete.
This glitch has been worked around by adding a special mode to avoid the deletion of
PCL permanent resource. Permanent macro PJL is required separately.
job was complete.
This glitch has been worked around by adding a special mode to avoid the deletion of
PCL permanent resource. Permanent macro PJL is required separately.
43
USTATUS is
available (Telefonica
specification)
available (Telefonica
specification)
In order to meet Telefonica specification, changes has been made as follows:
* Support is provided for USTATUS DEVICE
* Modification has been implemented to synchronise the output timing of USTATUS
* Support is provided for USTATUS DEVICE
* Modification has been implemented to synchronise the output timing of USTATUS
PAGE/JOB END to Output/Job End.
44
When entering with
LDAP authentication
directly, log-in name
will not be saved.
LDAP authentication
directly, log-in name
will not be saved.
On LDAP authentication, when logging into MFP with entering directly from LCD panel,
and execute the job in this condition, there were some cases where the log-in name of
the job log information would not be saved correctly. This glitch has been corrected.
and execute the job in this condition, there were some cases where the log-in name of
the job log information would not be saved correctly. This glitch has been corrected.
45
Email Reply address
is incorrect
is incorrect
When LDAP authentication was enabled on LCD panel, the machine adopts not the e-
mail address of Log-in User but the default SMTP reply e-mail address.
Modification has been implemented to change "Reply to" to the email address of Log-in
User. As for "From", modification hasn't been done due to the patent avoidance.
mail address of Log-in User but the default SMTP reply e-mail address.
Modification has been implemented to change "Reply to" to the email address of Log-in
User. As for "From", modification hasn't been done due to the patent avoidance.
46
Unable to change the
authority group of the
"Other User"
authority group of the
"Other User"
Default user in the User List Page of the Web could not be edited: Modification has been
implemented be editable.
implemented be editable.
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man118) service manuals if exist.