Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) Service Manual online
MX3500N MX-RKX1 13 – 2
4)
Attach two step screws A to the two positions where the fixing
screws have been removed.
screws have been removed.
5)
Engage the USB-hub base with the step screw A on the left
side. Then slide the base to the rear side.
side. Then slide the base to the rear side.
6)
Engage the USB-hub base with the step screw A on the right
side, and push it down.
side, and push it down.
C. Connector connection
1)
Connect the harness (A) of the USB-hub base to the connector
of the main unit through the clamp (B).
Connect the AC cord to the USB-hub base.
* Arrange the cable so that it is kept outside of the plate.
of the main unit through the clamp (B).
Connect the AC cord to the USB-hub base.
* Arrange the cable so that it is kept outside of the plate.
2)
Insert the AC power plug into the power outlet.
D. Turn on the power of the main unit
1)
Connect the earth cord, and insert the power plug of the main
unit into the power outlet.
unit into the power outlet.
2)
Open the front cabinet.
Turn ON the power switch in the front cabinet of the main unit.
Turn ON the power switch in the front cabinet of the main unit.
3)
Turn ON the power switch on the operation panel.
B
B
A
B
ON
ON
ON
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) service manuals if exist.