Read Sharp MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) Service Manual online
MX3500N MX-RKX1 13 – 1
MX3500N
Service Manual
[13] MX-RKX1
1. Unpacking
A. Check the packed items
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
Turn OFF the power switch in the front cabinet of the main unit.
3)
Disconnect the power plug of the main unit from the power out-
let, and remove the earth cord.
let, and remove the earth cord.
B. Installation of the USB-hub base
1)
Install the clamp. Connect the USB cable to the connector, and
engage the cable with the groove through the clamp.
engage the cable with the groove through the clamp.
2)
Install the mounting fixture and the keyboard rack, and fix them
with the screws A. Install the clamps.
with the screws A. Install the clamps.
3)
Remove the two fixing screws of the right upper cabinet of the
machine.
machine.
No.
Packed part names
Quantity
1
Keyboard rack
1
2
Mounting fixture
1
3
USB cable
1
4
AC cord
1
5
Screw A
6
6
Clamp
4
7
Step screw A
2
8
Step screw B
2
1
2
3
4
5
6
7
8
Used in other models
OFF
OFF
OFF
3
1
2
USB cable
To main unit
Click on the first or last page to see other MX-3500N / MX-3501N / MX-4500N / MX-4501N (serv.man11) service manuals if exist.